Originally Posted by
C Law
OP.........measure your current AC height (while on the bike if possible to account for sag). Compare it to the AC heights of the rigid forks. It's probably closer to the 1x1 due to sag. You are probable in the middle of the two, right?
I'm assuming that the correct measurement is this right?
So you're saying that with me on the bike, due to sag, the AC is probably closer to 80mm that 100mm, so the 1x1 should be roughly as close to current geometry as the Instigator?
EDIT: So I haven't measure my fork, but I found a
AC height table (for Axel Elite) that said mine should be about 480mm. So even if my fork sagged 40mm with me on it (or 4/10ths of the total travel) it would still be right at the Instigator height, and 34mm off of the 1x1 height. I'm starting to lean towards the Instigator, no pun intended.