Finally, the wheel is almost true. I have to sort out 1mm radial truing, on one quarter of the wheel. I plan to return to it in couple of days. I rode for close to half an hour and found no problems rechecking it.
The deflection on PT TM-1, from 14 to 15 for a 2.3 bladed spoke is 12. I can't get a granularity lesser than that. So, tension is set between 110 to 122 on the driveside.
miamijim: Thanks, btw, I had to set the TM aside for the final touch where I had to turn nipples for less than a 1/8 turn.
Al1943: Thanks for the tip. I found
this article. I really did go from Figure 6 to Figure 8.
Nothing, but only to ride hereafter.