Originally Posted by
lukasz
So only 97-98 Chorus would work?
Athena 9 speed and 1999 Veloce (I took a look at the 1999 catalog) might work too (2000 Veloce is different). They share a 10mm axle, the same record cones, and the same record freehub pawls but have a different axle. I have no clue if the axle needs to go too or if it's just a weight thing. People have swapped lower-end freehub bodies onto Record/Chorus and this is the most likely flavor.
I upgraded both of my rear Chorus hubs after Campagnolo quit selling my favorite 8 speed cassette but before the 9 speed 10mm axle (97/98) Chorus freehubs got expensive and then disappeared.
That stinks! I am fine with doing some serious surgery--bearings, axles, etc. As long as it comes back together. In this case, would a Veloce donor hub work?
Unknown.
Probably 1999. Not the post 2000 years I looked at.
A sampling of Mirage and 2000+ newer Veloce have cartridge bearings and a hollow axle.
The forgings look fatter in the middle than Record/Chorus, presumably to accommodate the axle. I'd be surprised if it fit together.