Rear Hub Disassembly?
So, on my Xero XR-1 wheels, the freehub body is a little bit loose. At first I thought it was the bearings, but they seem in good shape - smooth and no play. I'd like to take the wheels apart. They seem like a simple design - 5mm allen on one end (drive side), 19mm cone on the other (non-drive side). The cone comes right off, but the allen stays on there. What do I do at this point?
(1) Tap the nds to pop the axle out?
(2) Use a clamp (with wood blocks) to hold the nds axle, while loosening the allen?
(3) Post on bikeforums about it?