Originally Posted by
bobonker
Update: Got a bunch of parts to install, but have been super busy.
What type of bottom bracket tool do I need in order to remove this bottom bracket (pic #2 in first post)? Park makes a bunch and I have the one for Shimano Hollowtech II/SRAM GXP, but I'm not sure which one I need for this setup. I've seen people remove them using a chisel and hammer, but I don't want to go there.
Thanks,
Bob
If you have a Park CCP-22 Universal Crank remover that's fine. You also need a Lock Ring Remover and either a 26 or 27mm open end wrench for the LH Adjustable Cup. You'll also need a Fixed Cup Removal Tool to pull the RH Fixed Cup out of the Frame. Remember that the Fixed Cup is opposite thread from the Adjustable Cup.