Originally Posted by
Jaytron
Hey Carleton,
I tried to go with the Sugino bolts like you suggested, and they were too short to work with Omniums+FSA Pro track ring.
Omniums have a thick spider.
1) Use the female knurled backs from the single chainring bolt set and seat them in the spider. You may have to use super glue with Omniums. Other crank arms work fine (Shimano, Campy, SRM, Sugino).
2) Go to a store that has MTB parts and get some *steel* double chainring bolts that MTBers use. Use the male part from these bolts. They are longer and will reach through the back of the chainring. This is OK. They won't (shouldn't) touch your chain stay.
This is what I did when I had Omniums:
