^ "
.....you will get flanges for clamping/bolting the device to the benchtop."
I'll most likely clamp it in my vise rather than bolt to a benchtop as I have very limited space.
Will a larger dia wheel make any difference, say 6" compared to 4"? Here are a couple of cast iron prospects, thoughts? It looks like the depth/width of the groove is the same, but the flanges are wider on the 6", no specs are given but eyeballing the 4" the groove looks about 1" wide.
thanks, Brian
4" x 1.5" rated 700lbs
6" x 2"
