the other number I got (above the torque value) I believe was the powermeter ID...? Which was a 4 digit number, 5_ _ _.
*EDIT* found this information which explains why I only see the hub I.D. and 0.00 torque, which I suppose is normal with the older hub's firmware...
The torque offset should be 512 plus or minus 12 (though they may have relaxed this to 24), but your PT hub needs to be pretty new to show this on an Edge as this was only added in firmware release 6.49 by Saris. Prior to this firmware release the hub just transmitted the hub ID and not the offset so you may actually need access to a Saris/Cycleops head unit to see the offset.
Last edited by hammy56; 03-21-13 at 03:14 PM.