Hey Scrod, I bought a Phil Wood bottom bracket for my omniums but it seems its non-driveside's hole is ~24mm in diameter while the one on the original gxp bb is 22mm. There is also a clear wiggle room if I put the cranks in which doesn't happen on the original one.
The driveside is 24mm on both bbs.
Any idea whether I'm doing it wrong or got the wrong bb or I should use an adapter?
Edit: I now found
a post that explicitly says "
SRAM's GXP cranks have a 24mm spindle that steps down to 22mm on the non-drive side." which would suggest that I got the wrong PW BB?