Race tires
#27
Senior Member
Join Date: Apr 2008
Location: flatlands
Posts: 603
Bikes: GT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
with a good latex tube they are hard to beat.
veloflex pave/record/carbons with a latex tube as well.
I'll get ultremo's for my netx set of tyres, allround everyday tyres. heard nothing but good stuff about them.
pro race 3 seem to be a sideway's step from pro race 2, not much has changed in the way of feel, but they puncture and cut about 5 times as fast.
#28
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
https://www.conti-online.com/generato...gp4000s_en.pdf
Take it for what you will, but the GP4000S blew the other tires away. I read the entire thing and it seemed pretty well done and scientific.
#29
Senior Member
The test I had in mind was older than I thought it was. It's from 9/2007. It's linked from the Continental website, but it wasn't sponsored or affiliated with them. It was by a German magazine.
https://www.conti-online.com/generato...gp4000s_en.pdf
Take it for what you will, but the GP4000S blew the other tires away. I read the entire thing and it seemed pretty well done and scientific.
https://www.conti-online.com/generato...gp4000s_en.pdf
Take it for what you will, but the GP4000S blew the other tires away. I read the entire thing and it seemed pretty well done and scientific.
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#31
Glimmers of form
Join Date: Jul 2006
Location: Escondido, CA
Posts: 1,542
Bikes: Cannondale SystemSix 3, Specialized Stumpjumper M4 Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#32
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
You have got to be kidding me. In terms of "scientific", this test is right in between high school science project and drunken dorm party dare. Notice there is a significant bias toward Continental tires. Comments in the "performance in border areas" are uniformly good for Continental and extremely critical of most other tire brands. Big surprise.
The magazine wasn't commissioned by Continental or endorsed by them. They probably have advertising in there, but I would imagine those other companies do too. They gave the Schwalbe Ultremo the 2nd place in the test, and everyone seems to like that. They wrote good things about its handling. I'm sure that was just to make it look legit though.
Obviously it's not peer-reviewed journal material, but I thought it was pretty decent. But I'm not a scientist, I'm just an engineer. I believe whatever the spec sheet tells me.
Last edited by Flatballer; 02-04-09 at 05:59 PM.
#33
Senior Member
Are you saying Germans in general are in Continental's pocket?
The magazine wasn't commissioned by Continental or endorsed by them. They probably have advertising in there, but I would imagine those other companies do too.
Obviously it's not peer-reviewed journal material, but I thought it was pretty decent. But I'm not a scientist, I'm just an engineer. I believe whatever the spec sheet tells me.
The magazine wasn't commissioned by Continental or endorsed by them. They probably have advertising in there, but I would imagine those other companies do too.
Obviously it's not peer-reviewed journal material, but I thought it was pretty decent. But I'm not a scientist, I'm just an engineer. I believe whatever the spec sheet tells me.
As to the testing, because all the testing was done at the Continental facilities, and certainly with "help" from Continental engineers in optimizing their tires for their tests, it might appear that the test is a bit rigged. As an engineer, you should know that numbers from a test for which you know nothing about how it was performed are essentially meaningless.
And I'll bet the Germans tend to stick together too.
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#34
Senior Member
Join Date: Feb 2008
Posts: 778
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Are you saying Germans in general are in Continental's pocket?
The magazine wasn't commissioned by Continental or endorsed by them. They probably have advertising in there, but I would imagine those other companies do too. They gave the Schwalbe Ultremo the 2nd place in the test , and everyone seems to like that. They wrote good things about its handling. I'm sure that was just to make it look legit though.
Obviously it's not peer-reviewed journal material, but I thought it was pretty decent. But I'm not a scientist, I'm just an engineer. I believe whatever the spec sheet tells me.
The magazine wasn't commissioned by Continental or endorsed by them. They probably have advertising in there, but I would imagine those other companies do too. They gave the Schwalbe Ultremo the 2nd place in the test , and everyone seems to like that. They wrote good things about its handling. I'm sure that was just to make it look legit though.
Obviously it's not peer-reviewed journal material, but I thought it was pretty decent. But I'm not a scientist, I'm just an engineer. I believe whatever the spec sheet tells me.
#35
Senior Member
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#36
Senior Member
Join Date: Feb 2008
Posts: 778
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's another good one (which I must admit I didn't find)...does anyone wonder why the Vittoria Open Corsa CX has such poor rolling resistance in that test? Especially considering it's much thinner casing, and the fact that it goes against the findings of multiple other testing (including Tour's own previous testing)?
Zoom in on the picture of the tire in the summary and see if you can make out the size...looks to me like they were testing the 20C version instead of the 23...Doh! After seeing that....
I have to admit, the "wet" testing rig looks like it would be a blast! I'm not so sure I'd put much stock in the "results" though.
Now...I'm not saying that a 4000S is not a good tire. It is. In fact, I just wore one out that I'm pretty sure I NEVER had a puncture with, and they actually roll fairly well (about similar to Pro2Race). But, by no means are they "be all - end all" clincher race tires.
Zoom in on the picture of the tire in the summary and see if you can make out the size...looks to me like they were testing the 20C version instead of the 23...Doh! After seeing that....
I have to admit, the "wet" testing rig looks like it would be a blast! I'm not so sure I'd put much stock in the "results" though.
Now...I'm not saying that a 4000S is not a good tire. It is. In fact, I just wore one out that I'm pretty sure I NEVER had a puncture with, and they actually roll fairly well (about similar to Pro2Race). But, by no means are they "be all - end all" clincher race tires.
#39
Senior Member
Join Date: Jan 2008
Location: Georgia
Posts: 1,753
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have had Maxxis courchevels and they are really good, but not the best around. Their handling abilities are fine and I would say they feel about as fast as the GP4000, but have you seen how expensive those things are now Might as well get the much cheaper GP4000 from PBK for less than half the price and they ride about the same.
#40
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Talking of Challenge Criteriums... I really like mine. We get them as a team deal. They are similar to some Gommitalia, Deda and Torelli models. They probably mostly come out of the same factory in Thailand. Very good.
#41
Wheelsuck
Join Date: Jun 2007
Posts: 6,158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I like the Vittoria Open Corsa ride, but I could hardly get a single outing on them without a flat. The Challenge tires all have a 'puncture protection system' layer. Any input on the flats with these tires?
https://www.challengetech.it/
#42
Senior Member
When I raced clinchers last (Aug 2008) I used Michelin Krylions. They give up little in weight, corner fine, and are durable enough that I can ride around a football stadium's parking lot (i.e. lots of glass) and not worry about flats. I'd much rather carry an extra 20 or 40 grams on my tires than worry about flatting.
cdr
cdr
#43
Writin' stuff
Join Date: Feb 2007
Location: Durango, CO
Posts: 3,784
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 19 Times
in
4 Posts
I just finished proto testing the NEW Maxxis Courcheval 3C, which now has some sort of puncture resistant strip. Really, really excellent tire. Feels just as good as a GP4000 or the PR2's I used to race, and I had ZERO flats in about 2000mi of training+racing time. The rear tire gave out at about 2100, the front would still be going strong if I hadn't replaced it. Maxxis told me to ride them into the ground and it took a lot longer than I thought it would.
They should be available this spring, I think they were going into production as soon as we sent our reviews back.
They should be available this spring, I think they were going into production as soon as we sent our reviews back.
#44
Senior Member
Join Date: Jul 2008
Location: Denver
Posts: 619
Bikes: Road and Mountain
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I ride Conti GP 4000, just starting out in racing and my LBS recommended Veloflex Blacks - 190 grams each. Anybody have any experience with these tires?
#45
Senior Member
Join Date: Feb 2007
Posts: 3,917
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#47
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
What's funny about this is it completely turns on it's head the thought that tubulars were generally slower than clinchers. The top four tires in efficiency are all tubulars. Turns out that you just need to glue them on properly.
In mounting my tubulars, I too noticed that, far more important than lots of coats of glue on the rim and waiting a full day between coats, is using lots of glue on the base tape to ensure that the cotton is fully saturated. Glue holds in shear, so the goal is to produce the thinnest possible layer of glue while having the interface be fully wetted. The base tape has a far rougher surface than the rim, so it makes sense to use more glue on the base tape than the rim.
One coat on the rim, two coats on the base tape while the rim coat is drying, then one more layer on the rim. Mount the tire right after the second coat on the rim. Tires are solid and were mounted in an hour, both wheels.
In mounting my tubulars, I too noticed that, far more important than lots of coats of glue on the rim and waiting a full day between coats, is using lots of glue on the base tape to ensure that the cotton is fully saturated. Glue holds in shear, so the goal is to produce the thinnest possible layer of glue while having the interface be fully wetted. The base tape has a far rougher surface than the rim, so it makes sense to use more glue on the base tape than the rim.
One coat on the rim, two coats on the base tape while the rim coat is drying, then one more layer on the rim. Mount the tire right after the second coat on the rim. Tires are solid and were mounted in an hour, both wheels.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#48
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Well ?? I'm always open to new ideas
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#49
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
According to their propoganda, I mean marketing, it sounds like Pirelli bought Clement tires and then moved all the machines to Thailand to build tires. Obviously, Clement was well respected, and it seems that Challenge is doing a good job as well. Their Criterium Open Tubular (clincher) has a 300 tpi carcass, which should ride pretty nice. Their 'trainer' tire has a 240 tpi carcass, about twice the thread density as, say, a P2R.
I like the Vittoria Open Corsa ride, but I could hardly get a single outing on them without a flat. The Challenge tires all have a 'puncture protection system' layer. Any input on the flats with these tires?
https://www.challengetech.it/
I like the Vittoria Open Corsa ride, but I could hardly get a single outing on them without a flat. The Challenge tires all have a 'puncture protection system' layer. Any input on the flats with these tires?
https://www.challengetech.it/
As for punctures, all I can say is that I haven't ever punctured with them. I took them off for winter riding, but I had 1000 miles plus on them, including some commuting miles. The rears wear a lot faster than the front. I'd buy three! Also, they are supple and give good grip. Perfect for racing....