Thanks but here is the strange thing: With only the drive side installed and the non drive side in 1/4 the way just to make sure the thing is lined up. Same results. So the issue is with either the threads on the drive side or the BB itself. Because this is a long term project, I am going to install a regular Shimano BB just to see how things go.
I am positive there is no cross threading issues. The other possibility I thought of, is the BB although new is defective. I had this happen with a Deda BB earlier this year. With these sealed BB's there seems to be no way to know if the item is Ok from the getgo.
Thanks again & I will read the complete thread.