Installation of Shimano Ultegra 6500 Chainwheel
Hi all! I just registered as a newbe and I am getting ready to get back in the saddle. I'm in the process of upgrading my Atala bought in 1972! Read my intro for more info. I removed my old Stronglight Chainwheel from my old Atala and bought the Shimano Ultegra 6500 bottom bracket and chainwheel. I must have lost the instructions (if any). Anyway, the bb went in fine with the right tool but before I tighten up the allen screws on the crank, do I just use the allen screws to seat the cranks onto the splined shaft or should I "set" the splines into each other with a rubber mallet? Kindof wierd set up, since I am use to 17mm bolts and square shaft. Any help would be greatly appreciated!! Tony