Originally Posted by
Charles Wahl
Well, if the stays splay wider, then they might be very slightly further off-center at the point where crank interference might occur (assuming they're not bent). So I'm gonna stick with "little to do with it."
I'm going to stick with my guns on this one cowboy! Chainline is the distance from center. Adding spacers outside of the hubs will not change how far the rear cog is away from the centerline. And neither will bringing in the stays affect how far the cog is from the centerline.
jim
__________________
Cross Check Nexus7, IRO Mark V, Trek 620 Nexus7, Karate Monkey half fat, IRO Model 19 fixed, Amp Research B3, Surly 1x1 half fat fixed, and more...
--------------------------
SB forever