Take measurements on the hub and post up the results. It may be the powdercoat is too thick. I may be wrong but it seems to me the hub dimensions would be something of an industry standard.
I have some old Campy dropouts out in the garage. I'll edit this post in a bit once I measure them up. That may give you something to go by.
Okay, I measured an old Campy dropout from my wannabe framebuilding days. It's 10 mm inside (actual measurement .394). It's an old style long dropout with eyelets.
I then measured the threaded part of a Campy record hub (the part that slides into the dropout) and it measures 9 mm (actual measurement is .350)
Kurt
Last edited by satbuilder; 02-27-09 at 06:44 PM.