View Single Post
Old 07-26-09, 11:41 AM
  #6  
25hz
Senior Member
 
Join Date: Nov 2006
Location: Ontario, Canada
Posts: 94

Bikes: Homebuilt bents

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by UnsafeAlpine
My friends and I were looking at a trike sail passed up the other day and I asked one of my friends how they steer. Apparently, the question was too difficult for a rocket scientist, so I decided to ask here.

My curiosity stems from an engineering standpoint. Do trikes with two steering wheels have differential steering? If they do, how does it work? If they don't, what happens to the handling at speed?

Thanks.
Some of the answers are more complicated than the initial question, and they don't clarify anything due to an apparent lack of understanding of what they are talking about.

In short, the trikes steer just like a family car does.

"Differential steering" could apply to a lot of different mechanisms, but with experience, people can use braked differential steering at speed to produce the same steering effect even though neither front wheel is powered. One trike that I know of called the Sidewinder does use differential steering, but it is the exception, not the norm.

For those that like big terms, it's "Ackerman COMPENSATION", not "correction" or "steering", and on a trike, Ackerman compensation is a moot point unless you spend all your riding time at walking speeds. When cornering on a trike at speed, even while leaning to the inside of the turn, the inside wheel will be unweighted enough that any concerns about alignment or tire scrub are minimal. For anyone that has actually looked into Ackerman compensation on anything, there is no "perfect' setting. As soon as you turn your wheels, the alignment is off and gets further askew the further you turn the wheels. Of far more import is caster and scrub radius.

Last edited by 25hz; 07-26-09 at 11:46 AM.
25hz is offline