Go Back  Bike Forums > Bike Forums > Advocacy & Safety
Reload this Page >

trouble locking Trek 4300 w/ Kryptonite New York standard U lock

Notices
Advocacy & Safety Cyclists should expect and demand safe accommodation on every public road, just as do all other users. Discuss your bicycle advocacy and safety concerns here.

trouble locking Trek 4300 w/ Kryptonite New York standard U lock

Old 07-23-07, 10:25 PM
  #1  
Junior Member
Thread Starter
 
Join Date: May 2007
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
trouble locking Trek 4300 w/ Kryptonite New York standard U lock

Hi guys,

I bought a trek 4300 last week and finally a kryptonite U-lock, New York standard (not the faghattaaboutit one).

Anyway, I'm trying to lock the RIM of my rear wheel, with the seatTUBE, to the bike post (https://www.flickr.com/photos/colonia...ier/288987340/) and its damn near impossible - the space is so tight i actually have to position my bike diagonal relative to the bike post inorder to fit everything.

Another option that I could do is put the U-lock through the bike post, the rim of my rear wheel and either the seat stay or the chain stay (note that this isnt the sheldon style of locking your bike....in the U-lock contains either the seat stay/chain stay..such that the frame is still directly locked by the u-lock) - this option is also difficult because of the limited room.

Next, the sheldon style of locking i tried, and although there is still room, its still requires a little bit of wiggling.

Now, i havent tested locking my front wheel along with my rear wheel, frame and bike post, but i don't think its gonna be at all possible..givin the limited space i have with the U-lock.

Am i missing something here, or should i just get a new U-lock??

thanks
bonnicagi is offline  
Old 07-24-07, 05:21 AM
  #2  
Senior Member
 
Join Date: Mar 2005
Location: Toronto
Posts: 970

Bikes: Miyata 600, Marin Larkspur, Marin Muirwoods, GT tequesta, Fuji Ace

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have been locking my frame through the spokes of the rear wheel, with the U going through the triangle in the back, either both seat stays or both chain stays. My theory is that this method locks the rear wheel and the frame securely to the post while filling up my lock (krypto ny). I then lock the front wheel and frame to the post with a cable lock. While this set up is obviously not bombproof, it has sufficed for a year or two (I also try and lock up where there are lots of other bikes, which are badly locked up).
rajman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.