never did finish this thing gave it away
http://i30.photobucket.com/albums/c3...tripout001.jpg
this is my current project it had a bad ass paintjob mags and definetly the baddest bike in the hood
http://i30.photobucket.com/albums/c3...rumpifa001.jpg
after letting my little brother own it for 6 months hes paid me the 180 he did in damage to the paint and missing wheels i did get a sweet slick out of the deal.
http://i30.photobucket.com/albums/c3...2/db90fc8c.jpg

Would this by chance be the bike that you might have been seen riding on the silver screen last night?

sledbikes, that first one is hot, the second is nice also.

thanks

RAT fairing
 

Did you neuter a Polaris or an Arctic Cat? ;) :beer: You need that headlamp though!

I found a Vetter with the windshield cracked at the bottom (enough usable area for what I wanted to do), but the motorcycle yard wants 50.00 and I couldn't do it yet. Found a sealed 12V cycle battery there though that was a great deal. They sell KYMCO and used cycles, and KYMCOs are certain one of the nicest degrees of PHAT outside of a Harley lot, to stray OT slightly.

I thought I'd show off my newest creation...
http://i110.photobucket.com/albums/n...chwinn672a.jpg
http://i110.photobucket.com/albums/n...mmered/A24.jpg
http://i110.photobucket.com/albums/n...dewinder-1.jpg
http://i110.photobucket.com/albums/n...atRodEntry.jpg
http://i110.photobucket.com/albums/n...idewinder3.jpg

havent been on lately, been busy!

http://i101.photobucket.com/albums/m...a/100_0346.jpg
http://i101.photobucket.com/albums/m...icycles003.jpg
http://i101.photobucket.com/albums/m...a/bikes017.jpg
http://i101.photobucket.com/albums/m...a/bikes016.jpg

This is the Type 4 Streamliner:
http://i134.photobucket.com/albums/q...00000010-4.jpg
Fiberglass fairing, polyethylene side panels, cardboard tailfin. Duct tape.

Those are so purely elegant! Fantastic job.

East Hill

How does this one compare to the previous three incarnations?

East Hill

some my kids made yesterday ( well they picked the parts and I helped put them together they all wanted a black tuff :rolleyes: )The little one now has racer handlebars on it because it flipped too easily .

http://img.photobucket.com/albums/v2...anessabike.jpg
http://img.photobucket.com/albums/v2...kaylasbike.jpg
http://img.photobucket.com/albums/v2...jessebike2.jpg
http://img.photobucket.com/albums/v2.../jessebike.jpg

Is that an "F1" bike in the background?

http://i20.photobucket.com/albums/b2...6/100_0245.jpg

I ditched the engine because it was ridiculous and unnecessarily fast.


http://i20.photobucket.com/albums/b2...6/S5031559.jpg

http://i20.photobucket.com/albums/b2...6/S5031563.jpg
I ground the frame clean, welded what holes I didnt need, and began painting.


http://i20.photobucket.com/albums/b2...6/S5031567.jpg


http://i20.photobucket.com/albums/b2...6/S5031571.jpg

Now I wanted to chop the frame and do some fun stuff but I just can't decide what to do, so for now it will wait and be my weekend cruiser to the pool and store.

It would look cool with the engine now.

what kinda kit ya go wit, F/S ?

JC Higgins Colorflow
 

http://i201.photobucket.com/albums/a...Colorflow1.jpg

http://i201.photobucket.com/albums/a...Colorflow2.jpg

JC Higgins Colorflow frame
Monark repro front forks
Brooks seat
Schwinn crank
Kiddie bike handlebars

The bike in the background is very similar to the F1. It's the same bike without the fairing. Since I was building my own fairings, I choose to buy the one without the fairing.
I regret the decision, as the F1 also came with a 62 tooth chainring, which is impossible to find anywhere.

Sorry about the late reply.

The three bikes that preceded the Type 4:

Type 1 was 12 speed bike with an aluminum nose cone:
http://i134.photobucket.com/albums/q...00000014-1.jpg

Type 2 was the Type 1 with a "dustbin" over the front wheel:
http://i134.photobucket.com/albums/q...00000015-1.jpg

Type 3 was a fiberglass copy of the Type 2:
http://i134.photobucket.com/albums/q...00000008-1.jpg

Now why would you go off and do something like that??? Dude I think your bike is backwards... you may need to fix it. :P

the double tall is one sweet bike. i love it!

heres mine..
http://www.customtacos.com/gallery2/...m/P1010871.JPG

thats the coolest one ive seen

Do you still have the aluminium nose cone? That looks rather spectacular.

East Hill

No, I took it to a scrap metal dealer.

Too bad, that one looked pretty cool...but I would imagine the aluminium was a bit heavier than the fibreglass.

East Hill