View Full Version : Bicycle Mechanics
- making it go quicker
- 8,9,10 Speed
- Threaded Carbon Forks...anything worthwhile out there?
- Antisieze
- Bent Axle? Shimano Deore LX hub
- Mountain bike storage - disc brakes - hanging bike up
- Hub and spoke salvage...?
- 9 speed shifters, 10 speed cassette?
- Crankset with integrated BB
- Feasibility of swapping frames?
- What tire widths will fit a 27x1" rim
- frame too small
- Derailleur shims
- Creaking Steerer Tube
- basic headset question
- CX brake/shifter conundrum...
- Wheelbuilding question 1st timer
- I think my hub is bent-Chain is slack then goes taut WHEN COASTING.
- Stripped Hex screw...
- Looking for Ksyrium axle
- Drop Bar Drill For Aero Brake Levers?
- Acceptable chain tension
- 2008 Trek Madone question
- shimano nexus 7 shifter
- cluster f_____
- Sunrace
- "flange distance & dish" vs. center-to-flange
- Roubaix 07 Comp - Squeaks and Groans
- Shining-up old aluminum crankarms?
- cantilever to Single D 7 question
- Rodi/Vuelta Wheels - cannot find reviews
- Coaster brakes and freewheels
- Specialized rear derailleur hanger (replacem't)
- Brake discs are mostly interchangeable... right?
- jtek query
- Switching from 27" to 700mm - Please advise
- what to do when inner tube patch fails?
- Shimano FH-5600 hub dimensions?
- 9sp Ultegra Triple to 10sp Rival?
- Cannondale CAAD4 - worth it?
- Ultegra WH-6600 questions
- Rear gear change to smaller gear without my shifting
- FC 7800 10 Speed compatability with 9 Speed?
- Tool Kit
- Torque Screwdriver, where to get?
- 10sp crank set with a 9sp drive train?
- Is there something wrong with these Shimano 105 STI shifters?
- A HUGE THANKS to Sheldon Brown!
- Schwinn "Frontier FS" grip shifters parts identification
- Is my frame toast?
- swapping from 24 to 26 inch bikes....
- Rear Axle replacement
- Difference between 559x18 and 26" MTB wheel?
- Warped Single Piece Crank
- What purpose does this serve under the gear cluster?
- slipping forward on bike seat
- new chain jumping under load
- Full Fenders on Trek 5500
- Stuck Canti
- running a slightly short q-r axle
- Instructions on homebrew headset tools?
- Removing Old Crankarms
- Grease for gear hub?
- Sanding/stripping a Scott CR1 frameset
- Kettler Profi Workstand, anyone have one?
- Do I need a short or long cage rear derailleur?
- RD Problems Again, HELP
- Busted Crankarm
- Upgrading brakes - Raleigh (frustration) pics
- New Bike, Need help with a Front derailleur
- Buying Advice: Tools and Repair Stand
- Help set me straight on Shimano 10s compatibility
- What are the essential bike specific tools?
- Downsizing cassettes
- Problems w/Jalco GX460 Aluminum Road Wheels
- Bio-pace Question..........
- Problems w/Jalco GX460 Aluminum Road Bike Wheels
- aluminum tubing thickness?
- mystery rattle
- Hope Mono Mini Brake Bleed - help required please
- Continously Variable Planetary transmission
- Complete overhaul before next season
- valve extenders
- Modify frame head tube angle?
- SRAM Gripshift on Road Bars
- Recommend a chain guide alternative?
- Hitch mount receivers...
- Removing Cantilever brake stud
- Will 8 speed STI's work with 7 speed cassette?
- Shimano Ultegra SL
- Head tube ripple
- Bar end shifter diameter
- Need help with wheel build
- Broken chainring teeth
- 130mm hub for touring, or stretch 130mm frame to 135mm?
- Freehub repair - retaining bolt problems
- Nitrile Gloves And Mineral Spirits
- Opened up my bottom bracket, found corrosion and junk, need opinion (hi-res pics)
- STI maintenance suggestions
- Oil Crust?
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.