- seat post right size, not fitting
- Crashed and messed up the braking surface of my rims...replace only rims?
- Removing 30+ year old dried tubular glue
- Reflective strip coming off on Swable tires
- Seal fell out of idler pulley?
- upgrading from 8speed sti to 9speed sti...anything i should worry about?
- Can I use DA 9000 RD with my current DA 7900 set up?
- Stripped fork thread
- Newbie building wheels. Good idea?
- Missing Link KMC-11 master link
- Jet bikes
- Shimano shifter compatibility
- Bottom Bracket - '02 Fisher Marlin - E-Type?
- Long cage or Medium cage?
- Respoking a wheel / spoke sizing
- Another mystery flat
- NEED HELP! Shimano sl-6400 7 speed front down tube shifter problem
- Rim compatability... Cane creek "hub based" nipples
- Missing weather seal at BB where FD cable enters from top
- Steel vs. Aluminum. Never ending debate.
- Gouges/scratches on nitto bar clamp area. Is it safe?
- how to remove the back wheel?
- ST CT 15 shifter Shimano
- Another area to lubricate on brake calipers
- Shimano dyna sys compatibility.
- Need specs for scwhinn madison
- Can Buying A Smaller Fork Reduce Standover Height?
- Why Would my Shifter Cable Tension INCREASE?
- 9 and 10 speed compatibility
- Cantilever cable triangle install problem
- Classic Lightweight Front Derailleur problems
- Trek aluminum
- Cable Stop Fitting Question
- I'm stumped! Clickety Clack!
- Very cool olde school tool
- Hex nut for solid axle (IGH)?
- Headset centering sleeve does not sit flush
- last question for a while....
- 105 shifter questions
- GXP bottom bracket - how can I be sure I did this right?
- Compatability of Shimano Cassette on a Campy Hub
- Lock ring won't tighten fully...
- got brand new wheels, should I even out spoke tensions?
- Proper cable pull for Avid BB-5 disc brake Lever?
- Getting 2 of same bike to shift the same AND looking for YOUR preferences too.......
- Ergopower G-spring compatibility
- Broken shifter housing - now what?
- A dumb brake question...
- Cleats rotate on shoes
- Crown race on 105 is 27.0mm, need 26.4mm
- Eddy Merckx Frame Rear Derailer Problem
- Shift 3 times??
- Bent rim = repair or just buy a new wheel?
- Converting from SRAM Apex crank to SRAM X7 crank
- Need lower gears, will this work, older Shimano Ultegra?
- Shimano FD-6400 and STI compatibility
- Homebrew DIY chain lube users - storage and application?
- shimano sis/light action downtube shifter compatibility
- Question about rear deraileur and chain
- "Clip"-type master link
- Used spokes?
- Cable Housing length pics. Your opinion?
- Sturmey Archer Dynohub "8 59" 32H Wheel Build Information FYI
- Wheels, spokes and wobble
- Remove Residue From Cork Tape
- Short Presta valve stem
- Input on late 60's track wheelset re-lace.
- Tiagra front shift lever - how far should it travel to shift to big chainring?
- Couple of front derailleur issues
- DA/XTR Titanium freehub on other Shimano hub shell?
- Rear wheel woes.
- Threadless adapter spacer size
- dura ace cables on Shimano 105
- Rear Hub Noise - while coasting
- SRAM Red RD sporadically jamming
- Homemade bicycle roller?
- New fork for old bike question ( probably number 1487)
- Trek 1420 DT to STI conversion
- Help me modify a CycleOps Indoor Trainer
- Surly hub Bearings
- Threaded Steerer Length
- Brooks saddle question
- I have a few questions about wheel building.
- Cycle Ops Fluid 2 noise
- Lower gear wanted, change cassette or inner chainring?
- Carbon fork use after a fall......
- 9 speed rear, triple front, FSA claims only 10 speed cassette can be used?
- Cleaning Rust from Threaded Steel Steerer Tube
- Ksyrium SL with 11 speed?
- Help converting wife's road bike to flatbars
- Wheel bearing issue
- 27" to 700C with Canti Brakes
- Replacing really long threaded fork.
- Suntour Spirt Derailleur Clamp
- Crank arm length & stuff
- Pedal Pin Thread Size
- Rust!
- "Clunking" intermittently while pedalling
- Made a seat bag
- Could you help me identify my right crank?