- Wear on tops of freewheel cogs
- need upgraded hubs
- 8 speed upgrade options
- creek sound from my BB?
- Spoke coming loose...why?
- Range Problem with SunRace thumb friction shifters
- SRAM Double tap problem
- suntour cassette
- Celeste colored Fizik Microtex Bar Tape, where art thou?
- First time bike build project
- 9 speed Ultegra 6500 crankset with 10 speed 105 derailleur/cassette/chain?
- Which 10spd road shifter?
- Bottom Bracket Fit Questions?
- Shifts fine on stand, not on road
- Rubber boots over brake levers
- Is this a limitation or a we do not want to repair it.
- I need to make a 25.0 to 26.2mm seatpost shim.
- Convert bars on a Waterford 1250.
- Shimano Pro crank puller
- Rear derailleur noise...again
- Cable Housing is split open...
- Trike brakes.
- Left pedal spins freely?
- Sturmey Archer AW from the 90's interchangeable with S2C duomatic
- Adding Gravity Dropper Turbo seatpost to Raleigh Detour City Sport DLX
- building a DIY 'euro-style' bottom bracket/fork supported stand?
- Skipping after upgrading from 6 to 7 speed...
- Quando front hub schematic?
- Hydraulic brake clamping due to heat.
- Problems from bottom bracket area
- when to replace kids coaster brake
- Headset Bearing Cage positioning?
- Headset Bearing Cage positioning?
- Just installed new Cane Creek 110. It feels tight.
- New Dura-Ace - power level over 9000?!
- Kestrel 2011 RT 1000 Shift Problems
- Campy Xenon/Veloce Group: how good is it?
- Wheel Salvaging?
- Which tire liners?
- Shimano M520 pedal with SH-51 cleat - release tension affects "float" while riding
- Adjusting Front Derailleur
- Getting lots of flats...not sure why
- how to make a tire boot?
- Shimano st ef 40 7r shifter problem
- Dangerous loose feeling in rear end of bike
- Sigma 1609STS: Smartphone Miles traveled and Sigma Miles traveled to not match.
- Setting up vintage DiaCompe canti brakes
- does somebody make a wheel hub cartridge bearing press?
- Rear Cassette Question
- Shimano CX70 derailleur
- Forks look bend on this CL bike?
- Crank Arm Nut Missing
- Another grease thread
- Teeth on fixed gear lock ring rounded out - How to remove??
- cut in tire tread - delaying the inevitable
- City bike
- Repacing a fork
- Is it possible to put new style drivetrain on old 80's fuji?
- Lump on tire after 50km ride
- bar end shifters for 2002 raleigh c500
- Tire: OK to ride it or change it now?
- Any reason not to use triple STI shifters with doubles?
- Chain ring bolts and Uniglide hub
- Front derailleur click every time I push down w/ left pedal
- Shifters are binding on my Madone 3.1
- Shimano Tiagra Question
- Tandem Front Derailleur Problems
- Nexus 8 speed grinding noise in nearly all gears
- shortening a steerer tube
- Halfords fobbing me off?
- Does type of grease matter
- Where and when did back axles change?
- Horizontal Drop - rear wheel forward slippage
- help buying new brake levers
- 2012 CAMPAGNOLO REAR DERAILLEUR Mounting Sleeve 12-29 Conversion ????
- how do I adjust this hub? Nexus 8 speed with pics
- Drivetrain compatibility questions for frankenbike touring rig.
- Front Deraileur adjustment. help!!
- Shimano Hub Adjustment
- Touch-up Paint?
- Measure/Replace Spokes
- Made in France Chain
- XC-LTD brake oddness
- Pretty wrecked Huffy
- Can I drill out a Seat Post Clamp Bolt?
- Creaking Sound When Drive Train Under Load
- Can't mount Aerospoke
- 650b to 700c conversion - easy as...
- Replacing my cables
- Steerer Tubes, Headsets, and Stems
- Rear brake pad assembly is loose/wobbling
- Suggestions for removing an FSA Gossamer left crank retaining bolt
- Need to lower carbon steer plug, but it's rounded off.
- Expander bolt stuck in bottom of steerer- ok to ignore?
- Shimano 105 hollowtech compatibility w/ Felt z85.
- Tufo clincher tubular
- Help me to choose brake pads
- Carbon Fabric Scrap
- wheelbuilding, spoke gauge
- 28.6mm band for ancient 'EC type' XT front mech