View Full Version : Bicycle Mechanics
- tpi and tire wear
- Where is the bolt to loosen and turn 105 brifter levers?
- cranks for old BB
- Bike Tool Stand...suggestions?
- When the middle cog doesn't what to shift up?
- Ultegra 6700 shifter, XT 9-spd M771 RD not compatible?
- Emergency on-the-road Crank Repair
- BBright compatibility--who here understands how this works???
- Differences between 2007 and 2010 Easton EC90 SLX fork?
- emergency tire split repair on STP--it worked
- Loose middle ring- AGAIN!!
- Brake Pads cost?
- BB cartridge, confused about mounting
- Tire is twisting. What could be the cause of this?
- Disk break compatible?
- Campagnolo 11 speed chain - opening, closing, opening, why isn't it safe?
- Derailer hanger/adaptor claw restricting axle movement
- How much thread on a spoke?
- Rear sprocket pulling chain of front chain ring when in lowest gear
- Can some explain to me what this bearing size means, 10/19 x 5.5/7T
- New bottom bracket brings cranks closer to frame?
- Re-adjust derailleur after replacing wheel?
- left tiagra won't shift with cable attached
- any Brooks saddle gurus?
- Sheared bolt in cantilever brake post
- campagnolo compact front deraileur- how high do i mount fromthe big ring- 3mm???
- Bike trouble
- Bottom Bracket Thread Issue
- what size clamp for front derailleur on Specialized Tarmac 2007?
- ultegra brake fitting question
- Wear on one side of tires
- Short REACH quill stem
- Ream a 1-1/8" to 1" headtube reducer?
- SRAM or Shimano crank on a Campy 9-speed BB?
- trek 4300 question
- Shimano 600 crank removal
- Chain touching front derailleur
- Help me please!!
- Park clamp is stuck
- Stuck quill stem, searched the forum and tried it, but still doesn't work....
- Axle15mm dropout on a 14mm axle
- Cones Too Wide for Dropouts
- how to fix ? ideas about revoshift
- Newbie Adds Granny Ring to Surly Cross Check
- What Sheldon doesn't cover
- Marin Muirwoods 29er - internal hub + belt drive compatible?
- Bianchi Mystery Hole ???
- Dura Ace 7800 rear hub noise
- open-bearing wheel wobble
- Trek Soho 4.0 Alfine 8 Gearing
- which fork for semi-integrated headset?
- Replacing a Fork
- Bottom Bracket and Crank Size?
- Campagnolo mirage cranks compatible with everything else 105?
- Replacement for Shimano CN-UG50
- Quality of chains for MTB from department store
- Bottom Bracket Help for Italian Hardware
- Help me get a cross threaded pedal off of the crank!
- torque specs
- Issue with BB on Trek Classic 3 speed
- Can a hybrid bike be used on bad road with a lot of cracks?
- does a high pressure tire need a high pressure rim/tube?
- Stopgap use - 9 speed cassette, 8 speed system
- Handlebars Slipping
- Oil and Mineral Spirits on rim.
- rear shock issues: Fox Triad
- Replacing a Rear Wheel
- Cassette Wiggles
- Proper install of hex nut and knurled stop nut on valve stem?
- How to Front fork?
- Cassette grabbing chain in freewheel mode
- Road bike 1x10 conversion questions
- "Slightly" damaged Shimano RS-80 rear wheel - does the rim look safe?
- EZ lube Bottom Bracket
- 36 spoke spaced out
- Best way to wrap handlebars.
- Trek FX 7.0 gear hanger
- Deore derailleur, Sora Shifters
- How do I get the axle out of this front hub?
- Boeshield T-9 vs Finish Line Ceramic
- Speedplay cleat driving me insane!!
- dishing tool?
- T-bone accident: what's the damage
- Want to replace worn out drivetrain...
- Newbie Mechanic Question
- bummed out...stripped threat on left crank trying to change out pedals...
- lazy way to clean chainrings?
- 27x1/8" tire on a 27x1/4" rim?
- Clamping on a tapered surface?
- 10 speed turned itself into a 9 speed...
- Sram Nomenclature
- Stripped Crank Arm
- I want huge chainrings on my MTB, any suggestions appreciated!
- modern 10-speed drivetrain with DT friction shifters?
- Need a good bike cover
- Help with replacement brake pads!
- Chain for a Gary Fisher 1999 Joshua
- Disable shimano roller brakes power modulator
- Cant find bottom bracket sizing! (stronglight 80 cranks)
- Broke a spoke again: what should I do?