View Full Version : Bicycle Mechanics
- Ritchey hub question
- This Campy FD works with CT cranks?
- Bianchi bottom bracket fixed cup.
- chain not spinning backwards
- pedal bolt has become threaded and loose from S-shaped axle nut
- Upgrade cranks, derailleurs & shifter on a 20" folding bike?
- Tube powder or not tube powder...
- Shifter Change Out ?
- Headset won't stay tight
- Headset spacer as a shim washer?
- Is it OK to change spoke patterns.
- cutting carbon steerer, never seen this "premium" fangled nut before
- Is this brake caliper nut long enough for carbon stays?
- Compact Crank
- Bent fork, Head Tube, and Down tube
- Ultegra 9 speed on 600 8 speed hub question.
- Cost for Aligning Deraileur
- 700 wheels on a frame for 27's?
- Upgrading a hybrid with Shimano 105 set
- Chris King Classic Cross Rear Hub Doesn't Fit
- switching to down tube shifters
- Squished chainring teeth
- So frustrated--what is WRONG with this Campy shifting??
- Will Shimano Shifters work with SRAM rear Deraileur
- Front derailler adjustment
- Shifting RD both too loose AND too tight
- Is there a Shimano XTR front cone which is 10X1mm through and through?
- Is this a good way to decide on the maximum dish a wheel should have!?
- smallest cog? no way.
- Who still makes a fender punch tool?
- speedometer with poor calibration between trip and total Odometer
- Rebuilding MTB wheels. OK to reuse spokes? Source of inexpensive hubs?
- Mark seat post for insertion
- Triple shifter, double crank?
- tandem hubs?
- chewed up hub flange
- Do I need long reach brakes?
- Pedal hard from stop chain falls off front
- Freewheel seal loose
- Annoying rear derailleur/hub chirp
- Vertical dropout anti-rotation washers for Sturmey-Archer X-RK8 hub
- Shimano RapidFire Shifters - education needed
- The Adjustable Cup Is Going All The Way In?
- 8 speed STI shifters to a 10 speed ultegra rear derailure
- calcium sulfonate greas
- MTB rear hub on roady?
- Removing spacer on MTB hub
- Help! B screw = stuck dead kaput.
- Brake adjustment and Derailer adjustments after both front and back wheel overhauls
- Why can't I find the correct grip/twist shifter ????
- Pump rebuild
- Master links...
- Torque Wrench recommendations
- Poor man's Rohloff. (picture heavy)
- Help! Is my integrated headset toast?
- Poor shifting on trainer
- 105 freehub sounds gritty, feels smooth
- Do they still make "dummy" brake levers?
- Tiagra 4400 front brake has new "play..."
- Dual-Pivot modification
- Shimano XT Front Derailleur (FD-773) and use with DA Bar End Shifters (SL-BS77)
- freewheel help!
- mtb single speed chain tensioner that is really awesome.
- Which particulate mask is recommended when working around carbon fiber dust
- aanyone ever mount a rear side pull brake on the front fork?
- Any benefit std or long reach calipers
- No Chainstay Bridge for Mounting Rear Fender
- Continental warranty
- Where can I get Gates Belt Drive components?
- MP3 ran out of batteries and was greeted with annoying sound. Trying to figure out
- Spoke Length...have I figured them out correctly?
- Biggest chainring, biggest sprocket?
- Tires for special occasions?
- Installing a CARBON wheelset on CAMPAGNOLO VELOCE
- Front Suspension Help
- Are 2010 Ksyrium Equipes compatible with Shimano 8 spd. cassettes?
- Park truing stand TS-2
- skewer on real wheel of single speed mtb?
- Best Way to Remove Rust/Grime
- chain line, hub spacing question
- facing bb shell?
- presta adapter/shim on a schrader drilled rim?
- Campy cassette gears?
- avid juicy caliper bleed screw lost
- What I need for a good bench.
- ALERT! Shimano CN-6700 Chain and possibly CN-7900
- Panasonic Fork Replacement?
- motobecane rebuild
- Shimano Biopace 48 Tooth, 110 mm Chain Ring
- $31.99 rear derailleur + grind & file = $100 or better rear derailleur
- New (no-name) freewheel replacement, help
- front derailleur adjustment problem
- Which Front (Triple) Derailleur
- figuring out BB spindle length
- brake levers clamp too wide for handlebars, advice?
- switching from flat bar to drops, with shimano components
- Cannot remove cups from shell (ashtabula)
- "Bicycle Hand" brand tools, anyone use this brand before?
- Campagnolo cable ends - were early 8-speed brifters designed for smaller ends?
- shimano 11T Pulleys in a campagnolo Record RD
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.