- Broken top tube cable guide
- Removing rear derailleur without break chain... OK?
- direct pull brakes
- On Shimano XT brake housings there is a large TORX fitting on the side- does that..?
- Finish Line Ceramic WET™ Lube?
- Compatible?
- Micro-Blowout, Tyvek to the rescue!
- Chain jumps off middle chainring
- Spoke tension question
- Schwinn Le Tour headset
- Koolstop install on Cantilever brakes - problems
- new wheels never uniform tension
- 26 X 2.1 tires on 26 X 1.50 rims?
- cant true wheel
- using Campy integrated shifters w/ V-brakes
- Is a torque wrench required to install BB?
- Nitto M12 rack w/Paul Comp cantis
- Another Campy 11 Speed issue/question - chain / chainring noise.
- 36-hole rims w/ 18 spokes
- center pull brake adjustment on a 27 inch frame with 700c wheels
- Drivetrain setup advice: Ultegra FD+RD with touring gears
- Need halp getttng my stem/bars off my frame...
- Removing freehub from Forte Titan wheel?
- Fit question
- hand pumps, which ones are worth getting?
- 3 speed 29er? advice 1x3 3x1 or internal?
- from twistshift to triggerswitch, now crankset wont engage all gears
- Gears not engaging
- Has anyone considered copy / pasting shelds entire site over to a cleaner blog / site
- 7 speed shimano cassette on a shimano 9 speed hub please help
- Need DT Revolution Black Spokes
- Bontrager 4w Trip not reading
- what is the highest tooth chainring i can fit on my bike? needs a chainguard
- BB Stopped Creaking
- chain slipping off of large lower derailleur cog
- noise at 17mph
- Pedro's bottom bracket tool wrench size?
- spoke replacement
- Shimano RD MR40 XG 7Speed
- Why is derailleur default set to high gear?
- Wheel Rebuilding Question
- Servicing old "spuds"
- Skewers Too Thick?
- Normal Wear on Chain and Cassette & Replacement Questions
- Bike build: Shimano 6600 shifters what about FD and RD
- Seat post installation
- Weird chainring problem.
- Dura ace 7900 shifters
- cantilever to caliper conversion... fork replacement?
- Which Part of the Brake System Makes the Biggest Difference?
- Bottom Bracket for a GT mntn bike
- i think my front shocks are shot
- Desperate for urgent help!
- wheel spacing
- Loctite on hub cone/locknut?
- What wheel would you recommend for me?
- Shifter questions
- Shimano FD6500 Ultegra ... any good?
- Removing decal without damaging clearcoat?
- Durable bottom bracket for a Scattante XRL Comp
- Tire type/psi for heavier weight guy
- Does Anyone Use This Chain Measuring Method?
- Tire rubs on chainstay. 2007 Lemond Zurich
- Specialised phat tape
- how much psi is needed to grease speedpaly pedals?
- Nishiki Pueblo
- Can old tires make a swooshing sound?
- custom wheels under $500? options
- Bike Fork Confusion...
- freewheel threading on too far?
- Rear Derailleur Hanger
- Barend shifters
- Rim found to be true - after wheel being tacoed after crash
- Brake Cable Lubrication
- Gearing and wheels for touring.
- Slipping Seat Post On Soma Smoothie ES Fixed!
- Re-gearing for mountains?
- Advice on Gear Change Problem
- Shimano 600 Stem Handlebar Removal
- Anyone tape up their Ergon bar end grips?
- changing Ultegra gear ratio
- Surly 185 (black) crank arms are in stock! BB question for heavy rider.
- Insert from 3T funda on a different fork
- I built a set of wheels.... about 20 years ago
- Leaking suss fork. What gives?
- Crank arm to BB spindle shims! Any experience? How often does this work?
- Bianchi Milano bottom bracket
- bike project
- New Wheels on TREK 300
- Figuring out these canti doohickeys! (help please!)
- Is the (aluminium freehub) DA FH-7800 compatible with current generation cassettes?
- Ultegra STI shifters with cantilever brakes
- Wheel truing stand
- New chain wrecked already?
- Front Derailleur Problem
- Spoke length question : Sapim CX-Rays + DA 7800 hubs + Mavic OP
- Sturmey AW Issues
- Build sequence question - My first try
- Brazed on FD helpppp!
- Shimano Dura Ace 7800 replace to 7850 or 7900