- Newbie assembling a bike
- Upgrading my 14 speed peugeot...
- Advice on a removing crank with rounded bolt
- 9 spd brifter with 8spd cassette?
- Re-inserting chain pin tips/tricks?
- Replacing canti-studs?
- couple of lube questions
- Lube - Wet or Dry?
- Trying to find silver shimano rs10 rear wheel...
- Mustache Bar with EF50 Shifters?
- Any idea what this is ?
- What to do with Star Nut when Cutting Steerer Tube
- Changing campy freehub body from 8 to 9-speed?
- Brand New Road Bike, gears/chain skipping? Help please!
- shimano plastic BB cup cracked wtef?!
- Avid BB7 disc brakes rusting.help!
- Changing cables on road handlebars
- Removed derailleurs but still doesn't stay in gear
- Would this Shimano/Campy drivetrain combo work?
- New to multi-gears
- "soft" back tire
- campy crank / shimano cassette compatibility
- Did I buy the wrong Freewheel?
- identify ultegra versus 105 cassettes
- Wheel compatibility/options for older 6/7 speed setups?
- Spacer needed between Stem & Headset on Chromoly Steerer Tube?
- What to do for maximum pick up and speed?
- wheel out of whack (untrue) again...
- Member - Retro Grouch
- Brakes squealing - toe-in reversed
- Rear Derailleur sticks
- Easiest way to strip paint off an old chromoly/steel stem?
- Gear oils for IGH?
- This guy built his own plywood bicycle....
- Hitch Headaches
- Bottom Bracket Issues
- What exactly is this?
- Motobecane Messanger Sizing
- successful effort to get lower gears
- sora shifter question
- Crown race press interference
- WheelBuilding for begginers
- MTB Tires on a Cruiser Frame
- Shimano 105 STI shifters w/Ultegra components
- How does one determine the length of a quill stem?
- DA FD / Ultegra shifter compatibility
- defunkifying diacompe brs101's with tektro levers.
- Proper Shoe Goo Use
- Am I tone deaf? "Spoke tensioning - One hit wonder"
- 8 speed shfter help, stupid spring.
- Chain Jumping/Skipping
- Left rear break rubs on rim...
- Hairline cracks on rim (pictures)
- Brand new tiagra shifter won't shift
- Can my frame be saved?
- How to seal vinyl letters?
- Wilier Cento Uno Brace-on loose
- Stiff handlebars
- What is that sliver metal stuff underneath the seat tube?
- Mounting a kickstand on a bike without a mounting plate
- New Crankset and free spin
- can't install BB
- Am I gonna shoot my eye out?
- Bike Conversion Question
- Those with 2010 LHT..
- Barrel Adjuster for Rear Derailler
- Eggbeater rebuild question
- cheap ball bearings are bad?
- Replacement Ultra Torque bearing orientation
- Swaping parts from devinci 8-flat-8 2006 frame to 2010 Specialized demo 8 II frame
- Advice on bottom bracket sealed bearing Shimano BB-UN73
- Lube and chains
- 700x23c tube question
- Front Tiagra brifter is double & triple compatible but how?
- Are 10speed Shimano Cranksets compatible with SRAM front derailleurs/shifters?
- Seat Post Clamp - 31.8mm? or 31.9mm?
- From three sprockets to one... questions from a true beginner!
- 650B conversion issues, including gear phreaking
- Two SS/FG bikes froma tandem drivetrain?
- Formula 10 speed rear hub, OK or cr@p?
- Titanium frame flex
- SRAM FD's / road shifters / triple cranks
- Bearing cones for Shimano R600 wheels
- Elixir CR Brake Problem
- Back tire losing air, but why?
- proper bottom bracket size
- front rack woes / axle washer eyelet combo
- Wellgo R025 (rebuildable)
- building rear wheel
- cassette issue
- Better Beam Type Torque Wrench than Park?
- Derailleur questions
- Derailleur Removal
- tire/wheel compatability..
- New chain lubrication
- Can't Get FD Right
- Bent my rim
- Chain is not Ramping up to Big Chainring
- FD height - advice for switching back and forth b/w compact and standard
- 29 tooth cassette with campy short cage RD ?