- Just assembled Motobecane Fantom Cross Pro - not sure what two leftover parts are for
- 120 wheel in 126mm frame
- Chain problem
- Rear spacing ?
- Moving Gear shifter from down tube to handle bars and/or brakes
- will this derailleur work?
- Will my new bike rust? Paint Chipped?
- Broke the head off a bottle cage bolt and can't extract it
- Switching to drop bars. Possible on a cheap hybrid bike?
- Gluing tubulars
- Please help identify noise
- crankarm/chainring bolts too long
- Anyone have experience with the lefty conversion kit?
- Wheel Truing Questions
- LONG seat post.. custom or ??
- School me on threadless headsets.
- Freewheel problem
- bottom bracket help (fsa gossamer / square taper etc)
- Replacing crankset/compatibility issues
- new bike set up by shop... possible headset problem?
- Carbon Frame safe repair stand
- tool(s) for removing Shimano 600 freewheel?
- Which V-brakes don't use cheap plastic spring retainers?
- lock ring pliers, make yourself some
- 8 speed to 10 speed cassette change over question
- what kind of bike is this
- Do I have a Cracked Frame
- Cateye Bike Computer and Light Set , buy or not to buy?
- SA IGH off-road?
- Bike Tape (newb question)
- wheel dish question - 6 to 7 speed freewheel change
- front derailleur high limit problem
- Chainline on singlespeed
- Campy C-Record (circa 1989) Crankset Torque. Did I overdo it?
- AL headset in Steel frame?
- Cantilever Set-up Question
- chain lube, wet or dry?
- What is the diffference between Shimano RS10 and RS20 Wheels?
- Shimano Part Numbers question
- Saddle Separated From Rails HELP!?!?
- Pedal Question
- Correct BB length?
- Caged ball bearings in wheel hubs - Replace individually, or ready assembled set
- Dust cap for a Shimano XTR rear hub M-950
- How to compare Q factor difference between pedals?
- Bicycle noob here! Shifting issues, not sure what's wrong.
- Is this rear mech any good ?
- Should I get them?
- Colnago Ace - English or Italian bottom bracket?
- Seat post paint refurb for a folding bike
- My crank set..(details inside)
- Which front mech ?
- Freehub Issue
- Rim / tire compatibility?
- Microshift Brifters for DA 8 Speed
- Threaded Headset Adjustment
- woodman SL headset - who has one, who has worked on one
- 1986 Nishiki Sport Drive Train Upgrade
- SG-7R40 shimano inter7 replacement
- Installing Sturmey-Archer Circlips
- Mysterious hub issue
- replacing an 80's front axle set
- SRAM Red cranks compatibility with lesser SRAM Rival Bottom Bracket
- picture: cracked carbon--please help!
- 1974 World Voyager Dropout Screws
- chain replacement?
- How do I convert my new 105 (5700) triple shifters to double?
- Bontrager Race X Lite Crank BB options?
- help: airbrushing design on bike
- Noob: Adjustable stem goof
- bicycle chain and rust
- Shimano M770 Rear Hub
- Who makes their own parts?
- Shimano 9-spd compatible twist grip shifters
- aerospoke rear hub
- Sunrace 7-speed cassette tog cog slipping?
- Front tire on trainer bike keeps getting flats.
- Problematic drivetrain
- Derailleur ?
- Removing this Suntour Superbe BB?
- Sora Triple --> Any Decent Double on the cheap?
- 7 speed Shimano Bar Ends?
- Better MTB Frames?? Better Performance??
- levers are too far
- rusty sadle rails
- Campag Athena, 1st series, 7-speed rear mech
- Adjusting Mavic Kysirium hubs???
- Dura Ace 7900 shifter failure
- Creaking headset on my new Trek 2.3
- headset wrench substitute
- 9 speed 105 shifters getting long in the tooth..replace one or both?
- Threaded fork question - length vs headtube
- Motobecane Fantom Cross Uno conversion to geared
- Fully enclosed chain guard retrofit
- Upgrading threaded fork with integrated headset
- What's a good pump that's not a Topeak?
- Why do my hubs keep coming loose?
- mongoose cambridge bike/sram fron twist shifter.
- Speedplay pissing me off a bit
- 7700 freehub interchange-ability