- Can you re-round a rim if it's slightly off?
- How Hard Is It To Put A Bike Together
- Supporting the fork while hammering the star nut?
- Sheldon on Sora hubs
- Replacing Crankset
- what is proper etiquette regarding rim and tire labels?
- Headset standard question
- V brakes vs. Canti
- Interloc Racing Design Freewheels
- 1/8" chain on 8-sp crankset?
- Front Deraileur Issues
- FSA Seatpost - is a double bolt design worth a $14 premium over a single bolt design?
- Quick question on replacing crankset
- Bottom Bracket replacement issues
- removing a mangled dust cap?
- New RD, chain does not go onto outer cog
- Triple and compact crankset difference
- stuck adjustable headset race
- Servicing cups and cones
- Need some help. Problems with rear derailleur going into the small sprocket
- New bike (needs upgrades)
- RD7800 with 8spd chain?
- Inherited Trek 7100
- Shimano 600 friction shifters
- Chain/derailer jumping
- Tire sizing?
- What would be the best possible bike lock to have??
- Tightening bottom bracket plastic piece too much causes binding?
- Specialized Pro II tire direction
- shifter skipping middle ring on downshift
- Crack Dropout
- SRAM 9 speed road cassette compatible with SRAM 9 speed mountain drivetrain?
- front fork assembly
- Newbie in over his freewheel head
- is there a cant brake booster which will allow me to use a 26" wheel in a 700c fork
- Building a bike
- tape on full carbon/integrated handlebars?
- front D. cable goes slack
- Spoke length rounding question
- Mystery Creaking sound when I pedal
- bottom bracket noise (airy sound)
- 28 tooth cassette with 27 tooth RD
- Yet another dubious assertion by a mechanic...
- spokes stretching or did CRC ship wrongly sized spokes
- switching out rear derailleur. Advice on replacement
- Dura Ace Crank Arm Bolts (FC 7701)
- New rider with stupid shifting problem
- Badly bent derailleur hanger/drops on Bike Friday
- Innards of OCLV fork
- shifting issues
- Strange Noises
- Freewheel Question
- Drop Bars to Butterfly Bars conversion on a Surly LHT Complete
- Hanger being pulled every couple revolutions
- Roof rack questions...
- Chainline & Q-factor Questions
- MX4 Break issues.
- Auto shifting mountain bike
- 7800 DT shifters & Force?
- Front Derailleur Frustration! Shimano 8-speed compatible options for Wife's bike?
- front derailleur won't shift down - sram rival
- mixing Biopace granny gear with ramped/pinned middle and large
- Slow Shifting into Smaller Sprockets
- metal particles in brake pads
- 7800 Crank/bb interface q
- Hub locknut sweet spot
- compression nut and fork inner diameter differences
- Anyone still having problems with Truvativ Elita left crank arms?
- Need help identifying clipless pedals.
- Shifter-deraileur compatability
- SRAM shifter ratios?
- Calling all Gear heads !! Attention !! Gear Calculator Problem.....
- Chain rubbing on large chain ring.
- do I need to loosen a locknut to remove a quill stem?
- tire pressure
- Holes in the tire itself
- Chainring Question
- Issues w/ Shimano 105 9 Speed
- Deore XT
- Is this 7-speed Shimano Cassette a suitable Suntour replacement?
- Front Basket/Rack Fork has no mount holes
- New tire not round
- Painting my bike.
- does "indexed steering" necessarily require complete headset replacement?
- Shifting Problems with base level Shimano gear
- Do I need new spokes?
- HG CS-5600 10-sp Cassette on Fulcrum 5
- advice on best tires needed for distance riding...
- Ugly front shifting; possible reasons?
- The best of both wheels
- My MTB bullhorn handlebar project is complete!
- Trek Gobug Sport Brake Installation
- loose cassette body (ultegra)
- Recommend me a derailleur
- seized spoke nipple
- Lube them STI shifters!
- Campagnolo UT install on shell wider than spec
- Does anyone make a 1-1/4 quill stem to 1-1/8 threadless adapter?
- My suspension Fork is leaking oil!!!
- Presta valve stem through Schrader rim