- Schwinn 1500, air chuck, thumb lock, washer
- Checking bare rim for initial roundness
- Steel bolts from hardware store for crank?
- Hope 20mm thruaxle 5bolt - compability possible?
- Shimano 600 Rear Hub Question
- SKF Bottom Bracket
- 2 speed Grip shifter
- Seatposts: Mine is 27.0 but quite a damaged/loose steat tube top...try 27.2?
- bastard top cap
- building 36 spoke wheels gets expensive
- rim replacement
- Evaluating Used Titanium
- Did I kill this Nexus 7?
- Italian or English BB?
- How to replace the bottom bracket and what to buy?
- Brake Disc Spokes - Why are they all Leading?!
- Do these tires need to be replaced?
- Saddle Rail to Saddle Shell Loose
- Stripped Bottom Bracket Shell
- Question on shifter compatibility
- 12-27, DA7800, pully hits 27 gear
- Slack in the cable but no gear change
- Problem removing freehub
- **Moving the Saddle back?
- Rivet removal
- Will any 5 bolt 74BCD inner ring do?
- Any headsets with JIS cups?
- v-brake noodle liner replacement
- Chain skips gears if back pedling!!
- Shimano 105 front shifter not indexing
- What's wrong??
- Any good, cheap alternatives to Velox?
- can I use a 9-speed crankset on an 8-speed drivetrain?
- Rack attachment
- Shimano 6700 & 7900 brake lever pull ratio: Opinions & info
- Brakes Stick When Applied.
- Pump head
- Tire problem?
- Old Crank & New BB
- Handlebar Shims
- Sora brifters - replacement hoods?
- Campagnolo Two Speed Front Brifter to Three Speed?
- Trek 620 Stronglight Hinault Headset
- Dumb question: Is a 28" wheel the same as a 700c wheel?
- Camp-o'mano setup your thoughts please
- Crank breakdown question...
- Shimano 600 brake calipers vs Ultegra 6600: What's the difference?
- Need to route cable in shimano 3 speed shifter
- Replacing a derailluer cage?
- Freewheel doesn't "tick" but works
- Shimano double chainrings on triple cranks
- Replacement freehub for Alvio fh mc12?
- converting DA 9seepd RD to long cage
- what could be problem w/ brakes?
- Sturmey Archer Help
- Flared Headtube??
- 1mo old Dahon, commuter duty - maintenance schedule?
- Falcon 5 speed Thumb Shifters..?
- Vintage crank identification
- riveted vs. bolted cranksets?
- MTB Chainrings
- Do Carbon Frames Fatigue without failing
- New bike - bolts loosening?
- Dual valve floor pump, only one valve works.
- Campy 10spd crank/chainrings on 9spd drivetrain?
- Square-taper BBs: to grease or not to grease?
- Alfine grinding noise: help
- mounting fenders (mudguards)
- Strange grinding noise from all new drivetrain (?)
- Thomson setback seatpost question
- New hubs laced to older rims. Is that Ok?
- dumb cassette question
- Help identify this brand (logo posted) please!!!!
- having trouble inflating with Presta valve
- loose threading on new tires?
- new bottom bracket
- Bicycle Institutes
- I need a new Shimano rear derailer spring
- Mounting a front derailleur on an oversized seat tube?
- 9sp and 10sp cassette differences?
- More freehub fun
- V brake conversion to disc
- Brake Caliper Question
- 9 speed chain on 8 speed triple cranks and 7 speed cassette?
- New parts
- cleats isn't low enough to connect to pedal.
- Too small frame?
- Campy SR Strada Single Chainring Conversion?
- 7800 freehub
- diagnose a repeating click
- 6703 Shifter and FD on a double
- Aluminium Cannondale handlebar adjustment problem
- FD Cable rubbing frame
- Campy/DA Compatibility Question.
- Campagnolo 11-speed RD with 10-speed cassette/ergos?
- Huret Stem Mount Boss
- What's this braze-on on my Giant Yukon for?
- Help Identifying a frame
- Easing Axle Fit in Fork
- 1 1/8" Fork Steerer in 1" head tube