View Full Version : Bicycle Mechanics
- pedaling click, need solution?
- "dent" in carbon fiber road frame??
- Sram vs. Shimano
- New to bike repair and I've got a significant vibration at high speeds...
- 700 x 35 tire, can I use a regular tube
- Carbon frame touch-up paint
- Need help setting up Cateye Vectra computer
- Do you change your bike chain at 1/16" or between 1/16" and 2/16"
- Old Profile Aero bar mounting question
- Ticking noise while pedaling... New information
- Can I Use Any Crankset?
- Chain slips of rear rear derailleur
- Chain slips off rear derailleur
- Removing Pedal bearing seat from older tricycle
- BB install and 1 x gearing questions
- New to bikes, bought a broken one (apparently..)
- Shimano - Campy Chain Ring Compatibility
- Buying a bike with a dent in it (Cannondale Claymore MTB)
- Normal sprocket wear for ~100km?
- What is the problem with my bike?
- Best patches for a flat?
- 36t 74mm Chainring...Does it exist or am I on a wild goose chase?
- slit in tire, should I worry?
- Pedal slip in lower gears
- Converting to a triple
- Bike workstand at Lidl, UK , £29.99 only for a week
- Patch Failure
- Cable sleeves?
- Project Bike Gone Wrong????
- covert a 18 speed road bike to a 20 speed.
- How to remove cartridge bearings?
- Looking for Cannondale M700 '94 thread brake studs
- tiyer sizing hellp
- BB7 Road vs Mountain
- Separate cogwheels
- Wobbly 7sp Cassette
- Decent triple 'ring
- Misaligned Surly Long Haul Trucker frame
- Chrome pista, need help
- broken pedals, anyone else have issues with this?
- Grip Shift Cable Replacement
- hayes disc brakes
- Switching to a int. gear hub?
- What type of grease/lub to use on bike?
- Help me understand Presta sizing. Which is bigger?
- Looking for a new crankset
- 105 9spd rear der. compatable with 8spd sis shifter
- 5 spd sun tour lockring/outer race
- weird wheelbuild occurrence
- Maintenance on Shimano ES25 Bottom Bracket
- Tire Puncture Repair with Latex Tube Question
- Rear hub squeaking
- My Rebuild
- '72 Peugeot chain skipping on replacement cogs
- Schwinn High Plains, swapping Biopace for all alloy triple clearance problem
- Really stupid question: What are these parts?
- "Wobbly" Huret freewheel
- Back wheels spin when back pedalling
- Trek 930 turning into a commuter.
- Don't bother cleaning your chain
- Derailleur Clamp Adaptor for braze-ons
- Need help Choosing Bike Chain with today's technology.
- Question regarding the removal of paint from vintage bike
- Bottom Bracket Clicks.
- hub cassette compatibility
- squewer size question
- Seat positioning
- Does anyone make a non-marring (plastic/composite/whatever) spoke wrench?
- Bike Hand Spoke Wrenches
- Suntour a-3000 6-sp shifters with 5-sp freewheel?
- Flared head tube
- How to rise handle bars on uelsss thredless stem
- Component replacements for 1992 Shimano RX100 drive train?
- ? about ordering 700 x 25c tube with short presta valve
- White Lightning Easy Lube
- Question about hubs
- Chainring stripping teeth
- Bike Building 101
- Rear derailleur not shifting after changing cable
- Dura-Ace bar ends shifters. Install with levers on outside or facing the inside?
- are xtr hubs rebuildable?
- Velo-Orange Grand Cru headset
- Trail-A-Bike very difficult to fold - time to file some metal?
- spokes creaking or popping
- Seat sliding back
- Clunk Sound while pedaling, disappears when backpedaling
- Fine tuning front delailer
- r derailleur indexing issue
- second wheelset for do everything bike
- Adding a spacer to Shimano 600 thread-ed headset?
- Causes of chain and derailleur both breaking?
- shimano stx crankset disassembly?
- 84 schwinn sprint
- Question about threaded headset
- Need HELP with Velo-Orange Grand Cru Seatpost
- Installing Bullhorn Handlebars
- Tire suggestions for older Cannondale
- Clunking feeling on right pedal? (Also other questions) New to bikes
- Building a 12-34 Cassette (9-speed)
- Titanium frames and aging
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.