- question on tig welded frames
- Unusual frame design- speculation encouraged
- Split top tube design- yea or nay?
- Frame Jig thread
- Gas-welded frames...?
- Weight distribution f/r?
- First frame suggestions. Lugged city fixed/ss frame for 6" 170lbs.
- stainless rivnuts ever come loose?
- Stainless lugs ti tubes?
- braze-on for busch&muller dymotec-front fork
- Obtaining access to downtube
- Threading a Fork
- Oxygen Generators revisited
- Couple Questions Before I Start Brazing....
- Building a better bike stand
- Sources for alternate brand steel tubing?
- Downtube crashed. Is it possible to change???
- handlebars
- silver or brass
- What do I need to start**********
- drilling tops of fork crown of lugged steel fork
- what happened to cicli polito
- Broken rear derailleur hanger on a steel frame, repair?
- 1 1/8" Lugs?
- Removing inner portion of water bottle mounts
- BB and HT CHASING
- Is anyone familiar with Alchemy Bicycle Company in Austin
- Rescuing a Trek 613
- Cold Setting problem
- Thanks!
- Post-flux removal steel oxidation?
- titanium frames -- riveted vs welded water bottle bosses
- Bike for Oregon Manifest Competition
- Are you the next apprentice?
- S&S retrofitting for butted titanium tubes
- Designing adventure touring frame, feedback appreciated!
- Let's say you have $2500 for tools & fixtures...how do YOU spend it?
- Need advice on replacing downtube Trek 930
- Bamboo
- Horse Cycles - Brooklyn NY
- Braze-on size differences??
- Rothenberger Roxy 120L Brazing Kit
- Rear rack braze-on location?
- who will put 990 brake studs on my forks
- frame sizes
- polishing 7005 aluminum (clear coat required?)
- Headbadges
- cyclus/cyclo finishing tools.
- Discuss chainstay length
- Off-the-shelf jig cones?
- Beginners question - can I weld to my steel frame?
- Homebuilt jigs & helpers
- Need help from the pro's...
- long tubing
- Custom Ti Dropouts and carbon repair
- identifying Titanium
- Frame Modification Suggestions to Route Dynamo Wiring?
- "fluted" (?) forks
- Velomobile Project
- Replacing chainstays, bad idea?
- building a fillet part 2?
- I'm considering buying this OA torch set-up. Any thoughts?
- Building a road Bike (lots of photos)
- Some questions about a very old 531 (?) frame
- building a fillet?
- Ant Frame Building Program...
- Who makes the best touring drops?
- My Ti shortlist so far: DeSalvo, Kish, Quiring, Strong -- suggestions?
- "standard" locations for rack braze-ons?
- brazing disk tabs?
- Crashed cross check brazing practice, next step?
- torn between titanium and steel
- Process in becoming a framebuilder
- NOS Columbus SL sought
- Beginner Seeking Advice
- Starting to dabble had some questions
- Rebrazing the Downtube to BB
- so lets talk about .028
- Framebuilder in Arizona.
- Frames for Women Directory
- I'm interested in building a lugged steel frame. Where should I start?
- Seeking opinions about rear rack connections
- I received a tricycle frame, can it be repaired?
- Disassemble? No disassemble?
- Modify An Existing Frame Or Build A New One?
- looking for non op rear single speed disk
- 1995 Trek Single Track
- Repairing a weld in a aluminum swing arm assembly
- Rivet on front derailleur boss and riveting cable stops
- Bicycle stability question
- Making CF Handlebars?
- Having difficulty finding a shop to work with aluminum
- GT Course 853 - Rust Repair
- steel lugged frame construction
- "Post-weld heat-treatment" for cromoly...
- Cracked Tube Repair
- Left Seat Stay Rusted at Drop out
- Building a rear rack
- Carbon fiber tubing supply
- Lug prep: suggestions for mandrel?