PDA

View Full Version : Framebuilders



Pages : 1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36



  1. Need tips for bending chainstays
  2. Custom Steel Roadie
  3. What tube will slip on columbus spirit tubing, to make custom lugs
  4. Adding steel decorations to frame by brazing
  5. tips on building 1/2 toe clips ?
  6. home built, custom coupled carbon fiber touring tandem
  7. Do you need some free front drop outs and track ends?
  8. Main Tube Angle
  9. Bike Carry
  10. Show us your frame jigs and fixtures
  11. new version of bikecad out
  12. Bike builders in Alberta
  13. Anyone built a trailer?
  14. Finding lugs for english 3 speed type frame
  15. Need a frame with wide forks and sprocket
  16. BB, Headset, brake caliper choices
  17. Thoughts on wood.
  18. Air cooled Mig welding?
  19. Propane/oxy temps
  20. S & S Couplers
  21. Surface plate placement
  22. steering geo, trail and fork offset.
  23. Couple quick questions.
  24. Reynolds 953 Magnetic?
  25. Weight of touring frame vs road race frame
  26. frame jig pix
  27. replacing section of seatstay?
  28. Unicrown fork build
  29. Long Bike?
  30. First Custom Steel Bike Build
  31. ED coating
  32. Reynolds 531 vs modern equivalent
  33. identifying difference of 531 vs 531 SL
  34. Horizontal Dropouts - Why were they ever used?
  35. possibly warped seat lug
  36. bikecad and malware!
  37. How to repaint bike well?
  38. What files do you use?
  39. Some ideas for a custom build
  40. Weld quality
  41. Advice on ordering a custom steel bike
  42. Concept question
  43. Steel Frame Quality
  44. RIH bike build hot work fork blade radiusing
  45. Bamboo frame building on cable TV
  46. Frame #830
  47. WANTED: Builder to add Canti bosses to a Proteus frame
  48. fleur de lys lugs for first time builder
  49. Bronze TIG weld?
  50. Dimpling / Relieving Chainstays to allow for wider tires
  51. Improving Frames with Micropeening and Other Residual-Compressive-Stress Treatments?
  52. Conceptual YETI frame graphics. What do you think? Would you ride these?
  53. Carbon fenders
  54. Dynafile!
  55. What mill and/or lathe do you use?
  56. Tandem Frame
  57. Long unsupported seat tubes - how to do it safely?
  58. Powder Coat
  59. alternate methods for attaching a cable stop
  60. Previsualizing paint-jobs
  61. Frame straightening tool on C&V thread question
  62. Reviving the Dynatech. Or something :-D
  63. Build kits
  64. cable housing guide jig/fixture, what do you use?
  65. DIY Fitting Bike
  66. Ti printed cross drops.
  67. Convert old mt bike commuter to 20" wheels?
  68. I've heard of making bikes from plywood - but laminated cardboard? - Interesting
  69. Stainless steel tubing
  70. Paul Racer centerpulls with brazed-on bosses
  71. Bike Frame mods
  72. Powdercoating/media blasting and brazeons in So Jersey Philly
  73. how to determine frame quality
  74. Who has steel plate suitable for making large rear drop-outs for IGH ?
  75. Wishbone seatstay
  76. Derailleur Hangar Repair?
  77. Frame building as a business
  78. cracked aluminum fork
  79. Bent Seat Stay Steel Frame... Replace?
  80. Carbon Reinforcing
  81. Can I safely drill a steel fork?
  82. Painting and stickers. Some questions!
  83. Another reuqest for bent frame and fork evaluation - Salvagable?
  84. Brazing on the cheap
  85. Pre heat frame before cold setting?
  86. my blank piece of paper frame
  87. BMX forks
  88. Can this bridge be drilled into a brake bridge? Modifying 1979 Bill Boston Tandem
  89. Which tube is most vulnerable during full load / overload touring
  90. And you thought carbon fiber was problemactic....
  91. Lug lining to salvage a paint job?
  92. modifying a fillet brazed 531 tandem frame
  93. Q for Falanx re mixing grades of SS.
  94. Custom Steel Stem
  95. Over 200 braze points?
  96. down tube rippled by front end collision,any need for repair?
  97. cracked lug
  98. Did i harden the steel?
  99. Whippy frame energy return
  100. Actual head tube angle / changing fork atc