Bicycle Mechanics - BMX rear hubs- How do I fix it?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-22-02, 02:26 AM
Let me tell you about my problem. I have a BMX which has a bent rear hub. The part where i put on the pegs is bent at a 22 degree angle. I want to get a new one, but I don't know how to install one. Please tell me how to install one.
All you need to replace is the axle. If you're mechanically inclined just disassemble it, laying out the parts in the order they came out.
If it has a coaster brake, it's a little more complicated, but still fairly simple.
If you don't feel up to the task, let the Bike Shop do it. Shouldn't cost more than $15 or $20 USD, which is about the same price in EURO's.
06-22-02, 07:02 PM
You might also want to check the drop outs and make sure they are stright.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.