Mountain Biking - Clipless pedals
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
01-05-01, 08:43 PM
What is a good brand of mid range pedals?
[Edited by madsnake on Jan 8th at 03:28 AM]
01-06-01, 01:31 PM
shimano, ritchie, both make a good mid range pedal, shimano and ritchie have good float, although shimano are a little easier to dis-engage in my openion.! Especally if you use the spd multi release cleat.!!
01-07-01, 01:13 AM
Make sure you buy pedals that have bearings in them instead of bushings-bushings won't last as long
If you're gonna be cycling in muddy conditions, then Time pedals would have to be a consideration. I run them on my MTB and Cross bike and they're fab. Shimano pedals are also pretty cool.
01-08-01, 02:31 AM
Thanks for the replies.
Another query. Has anyone used the Kore G.A.S.S. Crmo pedal?
If so what is your opinion. Just that I could buy a set at a pretty good price. (No they haven't fallen off the back of a truck!!)
Urm, never heard of them b4...still, of what I know of Kore, they're pretty good products generally.
01-08-01, 10:13 AM
Never heard of em, never seen em. take care of design rip off`s, stay with the more well known names, then you cant go wrong. You know the old saying , all that glitters is not gold.!!!
01-11-01, 09:12 PM
I have been on a quest to purchase some new clipless pedals myself... rockwerks are some good CHEAP peddles that stand up to everything that Shimano's spuds can. I can buy rockwerks locally for $50-$60, but anyone that I know that is REALLY, REALLY seriously into MTB has Times. They have a simpler design, and shakes mud like a duck shakes water. You should be able to pick up a pair of times for 100 bucks.
02-11-01, 06:18 PM
I race BMX and I do alot of Trail riding on my Mountain bike... i found out that you dont buy a midrange pedal.... and I also found out that no pedal is like a Shimano Pedal... I sugest the cheapest shimano pedal you buy is an M434 with the plastic cage... they work awsome plus I like the fact that if you blow a clip you can finish your ride cause there is a platform there for recovery
02-15-01, 03:27 PM
went to my local shop to get some new cleats the other day but the only shimano ones they had were the SH-52's for the 858. when i got home looked them up in the trade sales and support guide and it says there all right for my 636 pedals, but when i fitted them they had an annoying click on high power downstrokes. so i compared them with the old sh-51's and found that 52's have i little spike at the rear which the spring plate was sliding up and down as i pushed down and pulled up. Ground it off and ther nice and silent and not as hard to get out. Just a little tip for you folk out there
04-08-11, 04:25 AM
I definitely second Time. You won't be disappointed !!1!
04-11-11, 08:25 AM
The TIMEs would probably still be working ten years later...much like this thread.
04-13-11, 02:26 AM
it's hard to go wrong with shimano. nothing but bad experiences with crank brother's eggbeaters.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.