Mountain Biking - Chain Guide
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-09-05, 01:17 AM
i need to get a chain guide, i was wonderig if you guys have any sugestions as to what you've had luck with. My chainrings are 42, 32, 24 any help much appreciated
06-09-05, 01:18 AM
You want one that still supports all three rings?
06-09-05, 01:20 AM
i'm looking for suggestions as to what you've had luck with, ideally i'd like to keep all three, but if need be change it
06-09-05, 01:25 AM
Well, first off, you will have to lose the 3rd ring. It gets replaced with a bashguard. There are some guides that allow the use of the middle and little rings, like the E.13 DRS (Dual Ring Security), and the MRP LRP(Long Range Patrol). You would probably want to buy a larger ring to replace the middle too. You also need to check if your frame has ISCG tabs, which are little tabs around the BB shell that are threaded, and make mounting a chainguide simple. If your frame does not have ISCG tabs, you will have to get the BB mount guide.
I am running a Gamut P40 chainguide, made by a small company up here in NorCal. The E.13 SRS seems to be quite popular with its bulletproof bashguard.
Here is the DRS
Here is the Gamut that I run
06-09-05, 01:30 AM
nope no ISCG tabs. i was looking at Gamut, and the e thirteen the other day
06-09-05, 01:40 PM
E.13. I run a DRS on my trail bike, and a SRS on my DH bike. Both have been bullet-proof. No ISCG tabs on my Kona, and the DRS performs fine.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.