Singlespeed & Fixed Gear - water bottle

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
anyone know of a clamp on water bottle cage for bikes with no braze ons?
Arsbars
06-15-05, 01:17 PM
hose clamps
chimblysweep
06-15-05, 01:18 PM
the saddle-mounted ones would work fine.
ah yes, the saddle mount, unfortunately I ride a Brooks saddle which won't accomodate the saddle mount...rails flare out more than on most saddles.
http://www.fisheroutdoor.co.uk/public/index.php/product/bottlesandcages/zefal//B125.html?Fisherpublic=cc6a78fb2bb23a5ec6093e770a619bf9
Use hoseclamps and electrical tape. Put a piece of tape around the frame in each place where you're going to clamp (to avoid scratching your paint job), then clamp the cage to the frame. Put a piece of electrical tape over the "slack" in the clamp, too, so that you don't have extra metal strips hanging off your frame (you can filet your thigh very nicely with those -- I can attest!).
BostonFixed
06-15-05, 01:36 PM
http://www.virtual-hideout.net/guides/watercooling_setup_pt1/hose-clamp.gif
+
http://store.airbomb.com/mmAIRBOMB/Images/large/q/WC7003.jpg
Put a little scrap of inner tube or electrical tape on the frame so the clamp doesn't scratch everything.
apologetic
06-15-05, 01:55 PM
unfortunately I ride a Brooks saddle
ah you poor guy!! ;)
hose clamps worked just fine for me.
weed eater
06-15-05, 04:32 PM
there's handlebar mounted ones too
Twofish makes a bit more, ummmm, elegant solution...
http://www.twofish.biz/bike.html
baxtefer
06-15-05, 05:03 PM
Twofish makes a bit more, ummmm, elegant solution...
http://www.twofish.biz/bike.html
which can be purchased here:
http://www.nashbar.com/profile.cfm?category=72&subcategory=1025&brand=&sku=13136&storetype=&estoreid=&pagename=
Lucky-Charms
06-16-05, 07:19 AM
hose clamps rawk
bailing wire also works well and earns even more style points
bostontrevor
06-16-05, 07:34 AM
Zip ties, biatch!
Plus my bottle cage doesn't have "wings" so I have to pass a doubled up spoke across the part of the cage with the screw holes and then tie that to the frame. Extra points for the use of a busted spoke.
i tried the two fish and found it to be not as secure
side to side as the hose clamp method.
i have the profile design saddlemount which
matches the triathlon thong i wear.
jeff
ewww stickerguy, more info than I needed
Ira in Chi
06-16-05, 01:19 PM
I forget who makes it, but i've seen a double bottle handlebar mount, very old-school euro.
Ah yes, it is Minoura.
http://harriscyclery.net/site/itemdetails.cfm?ID=1033
http://www.thebikezone.org.uk/thebikezone/riders/VicSutton/1959water.jpg
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.