Mountain Biking - Dangerboy plates for kona

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Dangerboy plates for kona


FREERIDEBRAH
06-27-05, 05:19 PM
EVERY ONE READ THIS

Putting the new rockers on a kona stinky or coiler will throw off the ratio of the shock. you usally have the ratio of 3 to 1 or lower on a fs bike. my stinky on its stock mode is less it is about 2.75 to 1. With the dangerboy plates it gives you the option of adding 1 or 2 inches to that. adding one inch to make it a 6 inch bike makes the ratio 3 to 1 and the 7 inch setting 3.25 to one which will make a diffrence in the way it rides and fells. but there is a solution to this! if you buy a new shock with a 1/4 longer stroke and place the shock in the six inch setting of the plates it will give you about 7 inches without messing up the ratio of 3 to 1 there for making the bike still feel and ride just as good as all the other 7 inch bikes. i know kona does not like the idea of the plates but i love it. (old shock size 7.875X2) (new shock size 7.875x2.25) my 26 inch tire does not hit the seat post but i dont know about the coilers.


snakehunter
06-27-05, 05:23 PM
HOORAY for Dirtbags...