Singlespeed & Fixed Gear - Miche Hub Threads
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-28-05, 11:50 AM
I can't find it now, but recently someone mentioned that the Miche hubs have a non-standard threading on them and that the threading of industry-standard cogs, such as EAI and Soma, will either not work or eventually destroy the Miche hubs.
Would someone who has Miche hubs, and who doesn't use the Miche adapter and Miche cogs, please comment on the truth or untruth of this?
06-28-05, 11:59 AM
The threading for the cog itself is standard, but Miche hubs use the same lockring threading as Campys (which is different than Suzue, Shimano, Formula, etc).
06-28-05, 12:55 PM
aren't miche hubs ISO threaded? vs. english thread cogs like DA, EAI?
As far as I understand it, you can mix and match but once you thread one type on you've gotta keep using it, repeated mxiing would mess up the threads.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.