braden717
07-08-05, 07:38 PM
i have a stripped seat post clamp and have a new one and dont know how to remove it any ideas
BMX - help!!
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : help!!
mude
07-08-05, 09:48 PM
try cutting through the screw/bolts or whatever with a hacksaw
Brian
07-08-05, 09:53 PM
If it's the kind with a bolt threaded into the collar, and no nut on the other end, the best tool is a mini tool like a Dremel, with a cut-off wheel. Whatever you do, be patient so you don't mess up your bike.
CMcMahon
07-08-05, 09:57 PM
EZ Out. Drill a small hole, tap it in, and drill the whole bolt out in reverse.
BikerLRY
07-08-05, 10:36 PM
try cutting through the screw/bolts or whatever with a hacksaw
I like that idea.
I like that idea.
Brian
07-08-05, 10:38 PM
EZ Out. Drill a small hole, tap it in, and drill the whole bolt out in reverse.
Yeah, what he said. I've said 100 times not to use a multi-tool to work on your bike - they're for emergency repairs only. Today I decided to install a Kore Chain Reactor on the tandem, using a Topeak Hummer. Now I must find some new screws...
Yeah, what he said. I've said 100 times not to use a multi-tool to work on your bike - they're for emergency repairs only. Today I decided to install a Kore Chain Reactor on the tandem, using a Topeak Hummer. Now I must find some new screws...