Bicycle Mechanics - 23c to 25c tire -- Can

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : 23c to 25c tire -- Can


Post42K
07-30-05, 08:39 PM
Title should have read: Can I open the brakes any wider when removing the wheel?

I'd like to switch from a 23c to a 25c tire on my road bike but I don't think they'll fit between the brake pads when removing/installing the wheel. I have Ultegra brakes and the existing 23c tires just barely fit between the brake pads when I remove the wheel after lifting that little lever. I think the 25's may be too wide. So, is there any way to widen the opening when I lift the lever without changing the width when the lever is closed?


allgoo19
07-30-05, 08:53 PM
Brake release cam can be only widen so much. You have to deflate the tire when you use wide tires.

For the note, I had to deflate 23c even some of 20c for the removal when I had them on. Tire width varies between the makers and models.

juicemouse
07-31-05, 08:21 AM
Title should have read: Can I open the brakes any wider when removing the wheel?

I'd like to switch from a 23c to a 25c tire on my road bike but I don't think they'll fit between the brake pads when removing/installing the wheel. I have Ultegra brakes and the existing 23c tires just barely fit between the brake pads when I remove the wheel after lifting that little lever. I think the 25's may be too wide. So, is there any way to widen the opening when I lift the lever without changing the width when the lever is closed?

An expensive solution would be to convert to Campy levers, but keep your Shimano brakes (or any other brake with a release lever). Campy's levers have a little button to serve as the brake cable release built right into the lever. This combo would give the maximum opening.