Bicycle Mechanics - i might have a problem, help requested
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
03-05-01, 05:56 AM
I`ve got a Pro - flex 856 and i`m rebuilding it know.
When i started to place my front derailleur, there where several problems.
* I could not get the derailleur in line with my chainrings.
* I could not get the derailleur at the right high, without hitting the back section of my bike.
So if my rear shock bumps in, the back section hits my derailleur.
I`ts a 97` XT front derailleur and a 01` XT crank with 44-34-22 chainrings.
Are there any bikers or 856 owners with the same problems?
Any tips or solutions are welcome!
03-06-01, 04:53 AM
Try emailing K2(formally known as pro-flex) and ask them the same question ..maybe they can help you !..
Toolfreak, I did notice something in a pic of the bike. The 856 uses a top pull, top swing, front der. If you replaced it with a der. that the clamp is lower than the original spec this may have something to do with it. I am kinda stumped here this problem should not occur. I don't see how the rear swingarm can hit the cage. A lower positioned clamp on the front der. may be contacting the spot where the swingarm mates to the frame. I don't know I am just guessing here. I hope you solve this.
03-06-01, 01:16 PM
I've got it!!! (yes)
At first, thank you for your replies!
The derailleur was original on the bike, so that's not the problem, but I've changed my cranks and the outer chainring is bigger than the original one.
So the front derailleur must be placed higher to get the chain on the outer chainring, at that place he hits th "swingarm".
Today I tried to place the derailleur right and I've got about 0.5 mm space between the "swingarm" and the derailleur.
Well that`s enough for me!
So this week I can go on with building my bike, yeah baby!
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.