BMXrider
08-06-05, 12:55 AM
hey guys i need someones help real bad on the bike i have i need to kno how to take the pedals off so i can change the sprocket and stuff so can some please respond
Bicycle Mechanics - Need Help
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Need Help
damoek
08-06-05, 08:49 AM
get a 15mm wrench; they both loosten towards the back tire
BMXrider
08-06-05, 10:32 AM
wat do u mean cuz i just looked at a 15 mm and it is way small and do u put the wrench on the screw thing and move the pedals towrds the tire? please reply
moxfyre
08-06-05, 11:15 AM
wat do u mean cuz i just looked at a 15 mm and it is way small and do u put the wrench on the screw thing and move the pedals towrds the tire? please reply
As I pointed out in another post, all of these routine repair procedures are explained in great detail in the "Repair Help" section of www.parktool.com
You're riding a BMX bike I gather? Some BMX pedals require a different size pedal wrench, I think it's 1/2". In either case, you put the wrench on the flats of the spindle between the pedal and the crank.
As I pointed out in another post, all of these routine repair procedures are explained in great detail in the "Repair Help" section of www.parktool.com
You're riding a BMX bike I gather? Some BMX pedals require a different size pedal wrench, I think it's 1/2". In either case, you put the wrench on the flats of the spindle between the pedal and the crank.
DannoXYZ
08-06-05, 03:07 PM
"wat do u mean cuz i just looked at a 15 mm and it is way small and do u put the wrench on the screw thing and move the pedals towrds the tire? please reply"
Yeah, it's either 15mm or 1/2" and you remove the pedals by placing them at the lowest position on the crank-spin. Put the wrench on from the back-wheel facing forward, and push down on the tool. You'll notice the left pedal is reverse-threaded (spins clockwise to loosen).
Yeah, it's either 15mm or 1/2" and you remove the pedals by placing them at the lowest position on the crank-spin. Put the wrench on from the back-wheel facing forward, and push down on the tool. You'll notice the left pedal is reverse-threaded (spins clockwise to loosen).
wasabiboys
08-06-05, 08:46 PM
1/2 or 91/6 ...do you have a 3 Piece Crank or one piece.. 1/2 is 1 pc. etc.!