BMX - Pedaling my *** off....

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Pedaling my *** off....


DCdense 88
08-13-05, 11:52 AM
as of right now i have a 39/16 gearing....i wanted to get a little bit more clearance for grinding and jumping...and also to get more acceleration....BUT...i don't want to be peddling for like ever.....i do mostly street riding....and also i live out in the ''country'' so i do have to get going sometimes...there are alot of hills where i am....you are all probably asking....''how does he live in the country and ride street''////welp i live near a pretty big city so ya...well anyways... i have poverty sealed hubs(flip flop hubs) what is the smallest freewheel that i can put on my bike...13?...well if 13 can...is 30/13 too small? ok...welp i am done asking questions now


bmxrdr88
08-13-05, 05:55 PM
your'e going to want to run a 36-13.

hypersnazz
08-13-05, 07:33 PM
your'e going to want to run a 36-13.

36-13 is taller than the gearing he's running now, it's equivalent to 44-16. That means slower acceleration, not faster. That being said, 39/16 is pretty short, I'm running equivalent gearing on my flatland bike. 32-13 would keep about the same ratio you have now, a *little* bit shorter but I really wouldn't drop down too short or you're spinning and spinning and going nowhere.


Brian
08-13-05, 07:50 PM
"Welp" is not a word. And we don't want to know about you peddling your ass, either. Sounds like something Queensrider might do. Your bike has pedals. There's a huge difference between peddling your ass and pedalling your ass off.

FireTeamCharlie
08-13-05, 09:36 PM
LMAO ex.

DCdense 88
08-14-05, 10:43 PM
"Welp" is not a word. And we don't want to know about you peddling your ass, either. Sounds like something Queensrider might do. Your bike has pedals. There's a huge difference between peddling your ass and pedalling your ass off................umm....well if you knew how to read you would see that what i said DOES make sense...lol......it says.....Peddling my *** off.......did you like not see that off...or did you just like forget it was there...or maybe these weird little bugs ate that part of your screen off....gezz.....but you need to learn how to read

Brian
08-15-05, 01:03 AM
...............umm....well if you knew how to read you would see that what i said DOES make sense...lol......it says.....Peddling my *** off.......did you like not see that off...or did you just like forget it was there...or maybe these weird little bugs ate that part of your screen off....gezz.....but you need to learn how to read

Right, so you're getting paid for it?

DCdense 88
08-15-05, 02:04 PM
getting paid for what?....correcting you

Brian
08-15-05, 02:48 PM
getting paid for what?....correcting you

You're not correcting me, you're only making yourself look stupid. Your bike has pedals, got it? Not peddles.

Look up these two words, then tell me you're correcting me:

Pedal, peddle.

CMcMahon
08-15-05, 03:10 PM
I know an old paisan who peddle pedals at the corner of 1st and Market.

KinetikBiker
08-15-05, 05:31 PM
hmmm


i wonder what it would be like to run a 44-9 or a 25-16.....

i just wonder.....

hypersnazz
08-15-05, 09:46 PM
hmmm


i wonder what it would be like to run a 44-9 or a 25-16.....

i just wonder.....

Well, you can get on a road bike and see what 53-11 feels like. Or get on a mountain bike and see what 30-32 feels like. They're pretty much what you'd expect. :rolleyes:

DCdense 88
08-15-05, 10:06 PM
that would be crazy...to have 53-11 or something on a BMX....gezz...you couldn't go anywhere...and as for the 30-32....well....i want that....you could like flip over when you go to peddle...(hahah i spelled it right this time)...

FuzzyRyder
08-15-05, 10:09 PM
no you didn't you [personal attack removed by Moderator]

DCdense 88
08-15-05, 10:14 PM
lol....i am a moron.,...i will admit...does it look like a ****ing grammer forum ..or a bike forum??? gezz take a **** on somebody else

FuzzyRyder
08-15-05, 10:15 PM
lol woah, i could really care less, i just thought it was funny

FireTeamCharlie
08-16-05, 12:41 AM
Beerman, I googled paisan, and have not a found a definition. Only links to some Movie about a lesbian homicidal terrorist(not making this up).

CMcMahon
08-16-05, 01:02 AM
Watch The Godfather and The Godfather II.

Brian
08-16-05, 01:04 AM
that would be crazy...to have 53-11 or something on a BMX....gezz...you couldn't go anywhere...and as for the 30-32....well....i want that....you could like flip over when you go to peddle...(hahah i spelled it right this time)...

lol....i am a moron.,...i will admit...does it look like a ****ing grammer forum ..or a bike forum??? gezz take a **** on somebody else

Oh, the irony of it all...

Brian
08-16-05, 01:05 AM
Watch The Godfather and The Godfather II.

And Goodfellas, Donnie Brasco, etc...

FireTeamCharlie
08-16-05, 01:10 AM
1. A countryman; a compatriot.
2. Slang. A friend; a pal.

CMcMahon
08-16-05, 01:23 AM
Wow. You found a dictionary. Congratulations.

FireTeamCharlie
08-16-05, 01:32 AM
YAY! But it was far from what i thought it would be(an asain prostitute).

yatt
08-16-05, 01:23 PM
Hahaha... Have any of you ever read over one of these threads you invent out of thin air? It's really amusing reading about how terribly people's grammar is criticized in a biking forum...
anyway I'm currently running a 16x44 ratio and was wondering how i could reduce the size of my sprocket, maybe lowering the gearing just slightly at the same time.
Thanks a lot
yatt

KinetikBiker
08-16-05, 02:09 PM
Wow. You found a dictionary. Congratulations.
Yeah Man! [edited by Moderator]

Brian
08-16-05, 02:40 PM
Hahaha... Have any of you ever read over one of these threads you invent out of thin air? It's really amusing reading about how terribly people's grammar is criticized in a biking forum...
anyway I'm currently running a 16x44 ratio and was wondering how i could reduce the size of my sprocket, maybe lowering the gearing just slightly at the same time.
Thanks a lot
yatt

When the chainring gets smaller, the cog has to get smaller as well. How much lower do you want?

yatt
08-20-05, 02:55 PM
haha well is there a point when the sprocket can be too small? I'm looking at getting an odyssey freecoaster and it has 10 teeth... so in order to have the same ratio as I have now what size sprocket would I have to run?
thanks a lot

Brian
08-20-05, 03:23 PM
haha well is there a point when the sprocket can be too small? I'm looking at getting an odyssey freecoaster and it has 10 teeth... so in order to have the same ratio as I have now what size sprocket would I have to run?
thanks a lot

You'd need a 27.5 tooth sprocket up front. I guess we'd have to make that a 27 or 28.

yatt
08-20-05, 10:04 PM
yeah that's what I was thinking... geuss kinnda got this algebra stuff down

thanks a lot

Brian
08-21-05, 12:10 AM
yeah that's what I was thinking... geuss kinnda got this algebra stuff down

thanks a lot

No worries. But it's not even close to algebra, and you need to work on your grammar too. Ride while it's light out, study when it's dark.

yatt
08-22-05, 11:28 PM
screw that its summer dude
rather sleep im tryin to grow tall
thanks for the answer though..

Brian
08-23-05, 01:23 AM
Oh, I forgot, since it's winter here. I'll cut you some slack.

bmxrdr88
08-23-05, 05:38 PM
unless you want to do some flatland. i've seen people running like 22-10.

DCdense 88
08-23-05, 08:42 PM
i have never heard of a 22 tooth sprocket...no way...i'm gettin one