Singlespeed & Fixed Gear - What tools do I need for Sugino 75 BB??

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
EnLaCalle
08-18-05, 11:53 AM
Can anyone tell me exactly what tools I need to remove and/or install a Sugino 75 BB?? When I say "exactly" I'm talking brand and model (and maybe even mfr. part #). It just seems like there are quite a few types of BB tools out there and, alas, I am confused. Thought I'd ask here first before I hit up the real life wrenches. Also, can I assume that I can use said tools on most (or any) square taper bottom brackets?

Thanks for the help.

J

mikearena
08-18-05, 11:57 AM
I used one of these: http://parts.spicercycles.com/site/intro.cfm?PageID=37&SKU=TL7344 and it worked like a charm. Box end for the fixed cup, pin spanner for the adjustable.
BlindRobert
08-18-05, 12:02 PM
You will also need (for removing it) a Park CCP-2 Crank puller, I use the Wrench Force combo fixed cup/hook spanner (lockring remover). I have the Park HCW-5 hook spanner, but it sucks and I wouldn't advise you to buy it.

absntr
08-18-05, 12:05 PM
That's an excellent tool.

In my basic bike tool kit (the $45 generic specials at Nashbar/Performance, etc), I use the pin spanner and the headset wrench that comes in it. But that one above is all in one baby.
EnLaCalle
08-18-05, 12:07 PM
BlindRobert!! Did you get my PM - I left my fender in your trunk and need to retrieve it from you. We can discuss this behind closed doors, however.
EnLaCalle
08-18-05, 12:09 PM
That's an excellent tool.

In my basic bike tool kit (the $45 generic specials at Nashbar/Performance, etc), I use the pin spanner and the headset wrench that comes in it. But that one above is all in one baby.

Naz!! Which one?? The one on the spicer link, or blindRobert's Wrenchforce combo?
absntr
08-18-05, 12:18 PM
Naz!! Which one?? The one on the spicer link, or blindRobert's Wrenchforce combo?

Spicer!
BlindRobert
08-19-05, 04:34 AM
Spicer!

...hmmm. I prefer to use a separate adjustable pin spanner. Do you have more than one bike? If you have more than one bike and they use different BBs you might prefer the adjustable too.

ELC - Thanks for the fender, it fits my bike like a dream! (see PM I sent you for retrieval...I can't believe you told everyone I own a <ahem> car.)