Road Cycling - Bike selection help

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Bike selection help

tivoli_mike
08-14-02, 03:51 PM
Hey,

I just came across a mid-90's Univega Gran Rally ( carbon fibre frame) w/ 105 drive train , new Mavic wheelset for around $450.

I believe it is about a 54cm frame ( i'm 5'10" w/ about 32.5" inseam)....

I rode the bike around and it does have a long handlebar stem on it and narrow drops ( both easily replaced)

For a first roadie, is it worth it?

pokey
08-14-02, 04:20 PM
NO!!
1oldRoadie
08-14-02, 04:30 PM
^What Pokey said^

ahuman
08-15-02, 08:51 AM
sounds like a good bike to me!
I dont understand why they are saying its not. whats wrong with the bike? if the frame fits. the drive train is a good one.
what wrong with it dont just say no and not tell why!
1oldRoadie
08-15-02, 09:28 AM
iT WOULD ONLY BE A GOOD BUY AT $200 - $250.
tivoli_mike
08-16-02, 12:50 PM
Well, as it turns out , after a good test ride, I found myself rather scrunched on the bike. That aside, should I just be wary of older CF frames in general? I have just started shopping for a roadie, and I am looking at used ones right now ( not so much budget, but I believe I can get more value for my dollar with an older restored bike ).

If there is anyone in the Seattle area, I have been poking my head into Recycled Cycles ( the stores, not the website as it is way out of date) and Second Ascent ( formerly Second Bounce ). Any other suggestions?

Thx