Bicycle Mechanics - Grease handlebar/stem? Still acceptable solution?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-26-05, 01:29 PM
Hello mechanics! I've been trying to solve my handlebar creaking issue here and have had trouble finding info by searching the forum. I found one thread from back in 2002 that is exactly like my problem. The folks replying all say to grease the stem and handlebar prior to clamping it down.
Link to that thread.
I'm wondering if this is still considered an acceptable solution?
08-26-05, 02:10 PM
What I did is, loosen the stem slighly, and drip penetrating oil in between the handlebar and the stem. Also, put some on the faces of the bolts that contact the stem. Fixed my problems anyway...
08-26-05, 02:24 PM
That is the fix for a stem that develops a squeek from the stem contact the inside of the steerer tube. Often this is most noticble when we get out of the saddle and really put some twisting and side to side stress on the handle bars.
Pull the stem from the steerer tube.
Using any grease (automotive or other) put a coating over the portion of the stem that is inserted into the steerer tube.
If there's any rust on the outside of the stem, it's a good idead to clean it up with some emory cloth first.
08-26-05, 02:46 PM
if its a road bike you have, chances are it could be the fork, where it mates with the wheel, grease it there and it should stop it. thoes carbon forks always seem to do it
08-26-05, 06:01 PM
There's also a chance that it's actually broken. I had a lovely Cinelli XA stem once and I couldn't for the life of me track down the creaking. I finally decided it had to be breaking, took the whole cockpit apart, stripped down the bars, and popped out the little flying C badge on the stem before I found a small hairline crack radiating outward from the countersunk hole for said badge.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.