Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.bmxdu
09-18-05, 02:49 AM
I have a pair of avid single digit Ti's (same as sd7 with ti mounting bolts) and the brake arms have an incerdible amount of play or slop at the pivot.
The right side has more slop than the other. At the end of the arms i can move them 3mm or so.
Is there anyway to remove the slop? I can see a gap at the pivot but it looks like theres no way to tighten up the pivot.
It makes my bike rattle like a b**** when riding over bumpy ground.
The right side has more slop than the other. At the end of the arms i can move them 3mm or so.
Is there anyway to remove the slop? I can see a gap at the pivot but it looks like theres no way to tighten up the pivot.
It makes my bike rattle like a b**** when riding over bumpy ground.