Bicycle Mechanics - bearing replacement
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
09-19-05, 10:46 AM
I am overhauling a threaded headset for the first time. Everything has been thouroughly cleaned, greased and reassembled. New bearings were used in old retainers. It still sounds pretty rough. I am thinking about replacing the bearings without the retainers, but am unsure of how many to use. Does anyone have some advice on this? Cheers.
09-19-05, 11:16 AM
Put in as many as you can fit, then remove one. That's the general rule of thumb.
09-19-05, 04:42 PM
I'll try it tonight. Thanks.
09-21-05, 02:36 PM
DiegoFrogs... Thanks. I ended up taking two out and it worked well. Cheers.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.