Bicycle Mechanics - Old Shimano Freewheel - Index Marks on Cogs?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
09-19-05, 09:49 PM
I took apart my freewheel from my 70's road bike to clean it up, just removed the cogs and spacers (didn't dissassemble the actual freewheel mechanism). Putting it back together, I imagine that the stampings on the cogs that have the number of teeth and the word "index" (with an arrow) should all be installed aligned with each other? I'm not a total noobie, I used to tear this bike apart and overhaul it on a regular basis in my early days. Just haven't done so in many a moon, and forgot to make a note of the positions before taking it apart. TIA for the help....
With a uniglide freewheel, or cassette it really doesn't matter.
09-20-05, 05:24 AM
Thanks for the info, it is appreciated. Wonder why the markings are even there then....
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.