[multisport]

I am in the planning process of converting a 2002 hybrid to a cyclocross bike. I think I will be sticking with the non-drop handlebars at least for the time being since I won't have to replace shifters and break levers. When not using drops, is there a general preference regarding flat bars vs. riser bars? My current bar is a riser 24.5" long, with a 50mm rise x 15 deg. I think it is a bit too much rise--especially with an adjustable stem. I've heard that flat bars can make one hunched over a bit too much, but would that be mitigated with an adjustable stem? Would a riser bar be better?

Thanks.

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[Thor29]

There's a little more adjustability available with riser bars (check out http://www.surlybikes.com/spew2.html for details) but for the most part there aren't any real differences. Riser bars just happen to be trendy right now. The biggest difference I've seen is that most flat bars don't have much sweep (the angle that the end of the bars bends towards you). I run Salsa Pro Moto flat bars that have 11 degrees of sweep (I think most riser bars are only 8 degrees and flat bars are typically 3 to 5 degrees) which I find very comfy on my wrists. The Surly Torsion Bar has 15 degrees of sweep and is cheap (and heavy) but the extreme sweep requires a longer stem to keep the same reach to the bars.