Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.jamlo21
10-04-05, 10:39 AM
Hi guys. Got a question. I replaced my aerobars and after reinstalling my ultegra shifters, I've noticed that it skips a gear (the rear shifter only). In other words, it does its normal clicks when shifting for the first 3 gears and then between the 3 and 4th gears the shifting is for lack of a better term "click-less" and the gears kind of just dance and then if I pull the shifter back more it resumes the normal clicking and everything is fine.
I know this was probably the most -untechnical description, but I'm the most untechnical guy. Just wondering why the rear shifter "skips" a few gears. I didnt do anything during installation except remove the shifters and re-install them....i.e. I didnt mess with the cables (except perhaps tugging at them during the re-installation process). Is there an easy fix?? Thanks guys!
I know this was probably the most -untechnical description, but I'm the most untechnical guy. Just wondering why the rear shifter "skips" a few gears. I didnt do anything during installation except remove the shifters and re-install them....i.e. I didnt mess with the cables (except perhaps tugging at them during the re-installation process). Is there an easy fix?? Thanks guys!