Mountain Biking - Crankpuller for Hollowtech

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.

PDA

View Full Version : Crankpuller for Hollowtech

J-McKech

10-06-05, 10:49 PM

I'm getting ready to install a e13 SRS and I'm curious which park tool puller to buy. I have the CCP-2, pretty sure this won't work. Let me know.

*edit* The CCP-4 seems to be it, this correct?

Raiyn

10-07-05, 01:50 AM

*edit* The CCP-4 seems to be it, this correct?
Yup. The CCP-4 is what you need Personally I have the CWP-6 which comes with both the 11.3mm (square) and 16.3mm (Splined) tips.

MtbVA

10-07-05, 12:20 PM

I used some flat washers (not sure what size #10 or 1/4" I think) that just fit inside the crank without covering the crank threads, then used an old park crank puller for square taper.
It bent the washers but it did work!
I would only do this if you can't wait for the right tool, just be careful!
I bought a pedros crank puller that has changeable tips for square or splined - works great!